Daily Papers

Tunneling spectroscopy is widely used to examine the subgap spectra in semiconductor-superconductor nanostructures when searching for Majorana zero modes (MZMs). Typically, semiconductor sections controlled by local gates at the ends of hybrids serve as tunnel barriers. Besides detecting states only at the hybrid ends, such gate-defined tunnel probes can cause the formation of non-topological subgap states that mimic MZMs. Here, we develop an alternative type of tunnel probes to overcome these limitations. After the growth of an InSb-Al hybrid nanowire, a precisely controlled in-situ oxidation of the Al shell is performed to yield a nm-thick Al oxide layer. In such thin isolating layer, tunnel probes can be arbitrarily defined at any position along the hybrid nanowire by shadow-wall angle-deposition of metallic leads. This allows us to make multiple tunnel probes along single nanowire hybrids and to successfully identify Andreev bound states (ABSs) of various spatial extension residing along the hybrids.

Topological kagome systems have been a topic of great interest in condensed matter physics due totheir unique electronic properties. The vanadium-based kagome materials are particularly intrigu-ing since they exhibit exotic phenomena such as charge density wave (CDW) and unconventionalsuperconductivity. The origin of these electronic instabilities is not fully understood, and the re-cent discovery of a charge density wave in ScV6Sn6provides a new avenue for investigation. In thiswork, we investigate the electronic structure of the novel kagome metal ScV6Sn6using angle resolvedphotoemission spectroscopy (ARPES), scanning tunneling microscopy (STM), and first-principlesdensity functional theory calculations. Our analysis reveals for the first time the temperature-dependent band changes of ScV6Sn6and identifies a new band that exhibits a strong signatureof a structure with CDW below the critical temperature. Further analysis revealed that this newband is due to the surface kagome layer of the CDW structure. In addition, a Lifshitz transition isidentified in the ARPES spectra that is related to the saddle point moving across the Fermi levelat the critical temperature for the CDW formation. This result shows the CDW behavior may alsobe related to nesting of the saddle point, similar to related materials. However, no energy gap is observed at the Fermi level and thus the CDW is not a typical Fermi surface nesting scenario. These results provide new insights into the underlying physics of the CDW in the kagome materials and could have implications for the development of materials with new functionality.

The orbital, spin and valley degrees of freedom in silicon quantum dots support many modes of spin qubit operation. However, it is generally challenging to obtain information about the energy level spectrum over large ranges of parameter space. We demonstrate a form of spectroscopy that is capable of mapping the energy level structure of a double quantum dot as a function of level detuning, interdot tunnel coupling, and magnetic field. In the one electron regime, we directly observe the transition from the atom like energy levels of isolated quantum dots to molecular like bonding and anti bonding states with increasing interdot tunnel coupling. We also resolve the Zeeman splitting of ground and excited valley states in a magnetic field. In the two electron regime, we gain access to the detuning dependent singlet triplet splitting. Our work may be extended to a broader class of systems, such as strong spin-orbit materials or proximitized quantum dots, allowing the direct extraction of various energy gaps.

Tunnelling reactions of molecules embedded on cryogenic noble-gas matrices are being used in fundamental studies of how reactivity varies with the nature of the supposedly inert matrix as well as pointers to the chemistry occurring in the interstellar medium on ice-grains. To these ends we present chemical kinetic rate constants for the cis to trans isomerisation of seleno-, thio- and monomeric formic acids and that of their three dimeric species, based on multidimensional calculations in the gas-phase, from 10~K to 300~K as a guide to the matrix reactions.

We present an escape rate theory for current-induced chemical reactions. We use Keldysh nonequilibrium Green's functions to derive a Langevin equation for the reaction coordinate. Due to the out of equilibrium electronic degrees of freedom, the friction, noise, and effective temperature in the Langevin equation depend locally on the reaction coordinate. As an example, we consider the dissociation of diatomic molecules induced by the electronic current from a scanning tunnelling microscope tip. In the resonant tunnelling regime, the molecular dissociation involves two processes which are intricately interconnected: a modification of the potential energy barrier and heating of the molecule. The decrease of the molecular barrier (i.e. the current induced catalytic reduction of the barrier) accompanied by the appearance of the effective, reaction-coordinate-dependent temperature is an alternative mechanism for current-induced chemical reactions, which is distinctly different from the usual paradigm of pumping vibrational degrees of freedom.

Auger electron spectroscopy, a way of characterizing electronic structure through core-level decay processes, is widely used in materials characterization; however direct calculation from molecular geometry requires accurate treatment of many excited states, posing a challenge for classical methods. We present a hybrid quantum-classical workflow for calculating Auger spectra that combines the generative quantum eigensolver (GQE) for ground-state preparation, the quantum self-consistent equation-of-motion method for excited-state calculations, and the one-centre approximation for Auger transition rates. GQE uses a GPT-2 model to generate quantum circuits for ground-state optimization, allowing our workflow to benefit from HPC parallelization and GPU-acceleration for favourable scaling with system size. We demonstrate the validity of our workflow by calculating the Auger spectrum of water with the STO-3G basis set and demonstrating qualitative and quantitative agreement with spectra obtained using completely classical full configuration interaction calculations, from the computational literature, and from the experimental literature. We also find that for water, substituting the variational quantum eigensolver (VQE) for GQE results in near-identical spectra, but that the ground state estimator generated by GQE contains about half the total gate count as that generated by VQE.

As scanning tunneling microscopy is pushed towards fast local dynamics, a quantitative understanding of tunnel junctions under the influence of a fast AC driving signal is required, especially at the ultra-low temperatures relevant to spin dynamics and correlated electron states. We subject a superconductor-insulator-superconductor junction to a microwave signal from an antenna mounted in situ and examine the DC response of the contact to this driving signal. Quasi-particle tunneling and the Josephson effect can be interpreted in the framework of Tien-Gordon theory. The situation is more complex when it comes to higher order effects such as multiple Andreev reflections. Microwave assisted tunneling unravel these complex processes, providing deeper insights into tunneling than are available in a pure DC measurement.

The long term scaling prospects for solid-state quantum computing architectures relies heavily on the ability to simply and reliably measure and control the coherent electron interaction strength, known as the tunnel coupling, t_c. Here, we describe a method to extract the t_c between two quantum dots (QDs) utilising their different tunnel rates to a reservoir. We demonstrate the technique on a few donor triple QD tunnel coupled to a nearby single-electron transistor (SET) in silicon. The device was patterned using scanning tunneling microscopy-hydrogen lithography allowing for a direct measurement of the tunnel coupling for a given inter-dot distance. We extract {t}_{{c}}=5.5pm 1.8;{GHz} and {t}_{{c}}=2.2pm 1.3;{GHz} between each of the nearest-neighbour QDs which are separated by 14.5 nm and 14.0 nm, respectively. The technique allows for an accurate measurement of t_c for nanoscale devices even when it is smaller than the electron temperature and is an ideal characterisation tool for multi-dot systems with a charge sensor.

We present 1d-qt-ideal-solver, an open-source Python library for simulating one-dimensional quantum tunneling dynamics under idealized coherent conditions. The solver implements the split-operator method with second-order Trotter-Suzuki factorization, utilizing FFT-based spectral differentiation for the kinetic operator and complex absorbing potentials to eliminate boundary reflections. Numba just-in-time compilation achieves performance comparable to compiled languages while maintaining code accessibility. We validate the implementation through two canonical test cases: rectangular barriers modeling field emission through oxide layers and Gaussian barriers approximating scanning tunneling microscopy interactions. Both simulations achieve exceptional numerical fidelity with machine-precision energy conservation over femtosecond-scale propagation. Comparative analysis employing information-theoretic measures and nonparametric hypothesis tests reveals that rectangular barriers exhibit moderately higher transmission coefficients than Gaussian barriers in the over-barrier regime, though Jensen-Shannon divergence analysis indicates modest practical differences between geometries. Phase space analysis confirms complete decoherence when averaged over spatial-temporal domains. The library name reflects its scope: idealized signifies deliberate exclusion of dissipation, environmental coupling, and many-body interactions, limiting applicability to qualitative insights and pedagogical purposes rather than quantitative experimental predictions. Distributed under the MIT License, the library provides a deployable tool for teaching quantum mechanics and preliminary exploration of tunneling dynamics.

The Casimir effect and superconductivity are foundational quantum phenomena whose interaction remains an open question in physics. How Casimir forces behave across a superconducting transition remains unresolved, owing to the experimental difficulty of achieving alignment, cryogenic environments, and isolating small changes from competing effects. This question carries implications for electron physics, quantum gravity, and high-temperature superconductivity. Here we demonstrate an on-chip superconducting platform that overcomes these challenges, achieving one of the most parallel Casimir configurations to date. Our microchip-based cavities achieve unprecedented area-to-separation ratio between plates, exceeding previous Casimir experiments by orders of magnitude and generating the strongest Casimir forces yet between compliant surfaces. Scanning tunneling microscopy (STM) is used for the first time to directly detect the resonant motion of a suspended membrane, with subatomic precision in both lateral positioning and displacement. Such precision measurements across a superconducting transition allow for the suppression of all van der Waals, electrostatic, and thermal effects. Preliminary measurements suggest superconductivity-dependent shifts in the Casimir force, motivating further investigation and comparison with theories. By uniting extreme parallelism, nanomechanics, and STM readout, our platform opens a new experimental frontier at the intersection of Casimir physics and superconductivity.

We discuss the use of tunneling electron current to control and catalyze chemical reactions. Assuming the separation of time scales for electronic and nuclear dynamics we employ the Langevin equation for the reaction coordinate. The Langevin equation contains current-induced forces and is used to define nonequilibrium, effective potential energy surface for current-carrying molecular systems. The current-induced forces are computed via Keldysh nonequilibrium Green's functions. Once the nonequilibrium, current-depended potential energy surface is defined, the chemical reaction is modeled as an escape of a Brownian particle from the potential well. We demonstrate that the barrier between the reactant and the product states can be controlled by the bias voltage. When the molecule is asymmetrically coupled to the electrodes, the reaction can be catalyzed or stopped depending on the polarity of the tunneling current.

We present shadow spectroscopy as a simulator-agnostic quantum algorithm for estimating energy gaps using very few circuit repetitions (shots) and no extra resources (ancilla qubits) beyond performing time evolution and measurements. The approach builds on the fundamental feature that every observable property of a quantum system must evolve according to the same harmonic components: we can reveal them by post-processing classical shadows of time-evolved quantum states to extract a large number of time-periodic signals N_opropto 10^8, whose frequencies correspond to Hamiltonian energy differences with Heisenberg-limited precision. We provide strong analytical guarantees that (a) quantum resources scale as O(log N_o), while the classical computational complexity is linear O(N_o), (b) the signal-to-noise ratio increases with the number of processed signals as propto N_o, and (c) spectral peak positions are immune to reasonable levels of noise. We demonstrate our approach on model spin systems and the excited state conical intersection of molecular CH_2 and verify that our method is indeed intuitively easy to use in practice, robust against gate noise, amiable to a new type of algorithmic-error mitigation technique, and uses orders of magnitude fewer number of shots than typical near-term quantum algorithms -- as low as 10 shots per timestep is sufficient. Finally, we measured a high-quality, experimental shadow spectrum of a spin chain on readily-available IBM quantum computers, achieving the same precision as in noise-free simulations without using any advanced error mitigation, and verified scalability in tensor-network simulations of up to 100-qubit systems.

Quantum computers can be used to address molecular structure, materials science and condensed matter physics problems, which currently stretch the limits of existing high-performance computing resources. Finding exact numerical solutions to these interacting fermion problems has exponential cost, while Monte Carlo methods are plagued by the fermionic sign problem. These limitations of classical computational methods have made even few-atom molecular structures problems of practical interest for medium-sized quantum computers. Yet, thus far experimental implementations have been restricted to molecules involving only Period I elements. Here, we demonstrate the experimental optimization of up to six-qubit Hamiltonian problems with over a hundred Pauli terms, determining the ground state energy for molecules of increasing size, up to BeH2. This is enabled by a hardware-efficient variational quantum eigensolver with trial states specifically tailored to the available interactions in our quantum processor, combined with a compact encoding of fermionic Hamiltonians and a robust stochastic optimization routine. We further demonstrate the flexibility of our approach by applying the technique to a problem of quantum magnetism. Across all studied problems, we find agreement between experiment and numerical simulations with a noisy model of the device. These results help elucidate the requirements for scaling the method to larger systems, and aim at bridging the gap between problems at the forefront of high-performance computing and their implementation on quantum hardware.

Identifying transition states (TSs) on potential energy surfaces is a central computational bottleneck in mechanistic studies of catalytic materials. A TS search is not a single calculation but a long-horizon, multi-step workflow of atomistic simulations with delayed, asynchronous feedback and heterogeneous failure modes that require a joint multimodal analysis of scalar convergence diagnostics and atomic geometries along the reaction path. To address this challenge, we propose TSAgent, an agentic workflow that automates TS search directly at the density functional theory (DFT) level of quantum chemical accuracy. TSAgent operates through a persistent plan-execute-analyze-replan loop, continuously adapting its strategy based on convergence diagnostics and geometric feedback without human intervention. We evaluate TSAgent on a diverse 100-example subset of the OC20NEB heterogeneous catalysis benchmark, where it successfully locates TSs with 83% accuracy. In a direct comparison against expert DFT practitioners on 10 held-out examples, TSAgent achieves a 70% success rate compared to a human-expert average of 73 +/- 12%. Finally, TSAgent independently reproduces Bronsted-Evans-Polanyi scaling relationships for NH3 dissociation on metal and single-atom alloy surfaces from a published heterogeneous catalysis study, demonstrating that its utility extends beyond curated benchmarks to real scientific investigations.

Superconducting nanowire single-photon detectors are widely used in various fields of physics and technology, due to their high efficiency and timing precision. Although, in principle, their detection mechanism offers broadband operation, their wavelength range has to be optimized by the optical cavity parameters for a specific task. We present a study of the optical absorption of a superconducting nanowire single photon detector (SNSPD) with an optical cavity. The optical properties of the niobium nitride films, measured by spectroscopic ellipsometry, were modelled using the Drude-Lorentz model with quantum corrections. The numerical simulations of the optical response of the detectors show that the wavelength range of the detector is not solely determined by its geometry, but the optical conductivity of the disordered thin metallic films contributes considerably. This contribution can be conveniently expressed by the ratio of imaginary and real parts of the optical conductivity. This knowledge can be utilized in detector design.

Local molecular orientation and conformation within nanostructures is central to their behavior in devices, emergent quantum states, and biological processes. X-ray microscopy and scattering at the carbon absorption edge is uniquely sensitive to these phenomena, through transition dipole moments encoded with photon energy and polarization. However, quantitative analysis is precluded due to the lack of accurate optical models with bond and orientation specificity. We generate such a model through an unsupervised machine learning algorithm that clusters density functional theory calculations into principle electronic transitions, quantitatively refined with angle-resolved absorbance measurements. The resulting optical tensor reproduces data from samples with domains of different orientation and crystalline packing. This refinement method connects spectral features to chemical moieties and resolves measurement-inaccessible dipole moments, establishing a new paradigm for label-free orientation analyses of bonds within molecular nanostructures.

Earlier, in the CINT program at Los Alamos National Laboratory, we focused ultrafast mode-locked lasers on the tip-sample junction of a scanning tunneling microscope to generate currents at hundreds of harmonics of the laser pulse repetition frequency. Each harmonic has a signal-to-noise ratio of 20 dB with a 10-dB linewidth of only 3 Hz. Now we model closed quantum nanocircuits with rectangular, triangular, or delta-function barrier, shunted by a beryllium filament for quasi-coherent electron transport over mean-free paths as great as 68 nm. The time-independent Schrödinger equation is solved with the boundary conditions that the wavefunction and its derivative are continuous at both connections. These four boundary conditions are used to form a four-by-four complex matrix equation with only zeros in the right-hand column vector which is required to have a non-trivial solution with each of the closed nanocircuits. Each model has four parameters: (1) the barrier length, (2) the height and shape of the barrier, (3) the length of the pre-barrier, and (4) the electron energy. Any three of these may be specified and then the fourth is varied to bring the determinant to zero to find the solutions on lines or surfaces in the space defined by the four parameters. First, we use a simplistic model having a rectangular barrier. The second model has a triangular barrier as a first approximation to field emission, and we are considering applying this approach for a self-contained nanoscale extension of our earlier effort to generate the harmonics at Los Alamos. The third model has a delta-function barrier, and the fourth model is an extension of the first one where the width of the rectangular barrier is varied inversely with its height.

Optical detection of magnetic resonance enables spin-based quantum sensing with high spatial resolution and sensitivity-even at room temperature-as exemplified by solid-state defects. Molecular systems provide a complementary, chemically tunable, platform for room-temperature optically detected magnetic resonance (ODMR)-based quantum sensing. A critical parameter governing sensing sensitivity is the optical contrast-i.e., the difference in emission between two spin states. In state-of-the-art solid-state defects such as the nitrogen-vacancy center in diamond, this contrast is approximately 30%. Here, capitalizing on chemical tunability, we show that room-temperature ODMR contrasts of 40% can be achieved in molecules. Using a nitrogen-substituted analogue of pentacene (6,13-diazapentacene), we enhance contrast compared to pentacene and, by determining the triplet kinetics through time-dependent pulsed ODMR, show how this arises from accelerated anisotropic intersystem crossing. Furthermore, we translate high-contrast room-temperature pulsed ODMR to self-assembled nanocrystals. Overall, our findings highlight the synthetic handles available to optically readable molecular spins and the opportunities to capitalize on chemical tunability for room-temperature quantum sensing.

Establishing the relationship between 3D structures and the energy states of molecular systems has proven to be a promising approach for learning 3D molecular representations. However, existing methods are limited to modeling the molecular energy states from classical mechanics. This limitation results in a significant oversight of quantum mechanical effects, such as quantized (discrete) energy level structures, which offer a more accurate estimation of molecular energy and can be experimentally measured through energy spectra. In this paper, we propose to utilize the energy spectra to enhance the pre-training of 3D molecular representations (MolSpectra), thereby infusing the knowledge of quantum mechanics into the molecular representations. Specifically, we propose SpecFormer, a multi-spectrum encoder for encoding molecular spectra via masked patch reconstruction. By further aligning outputs from the 3D encoder and spectrum encoder using a contrastive objective, we enhance the 3D encoder's understanding of molecules. Evaluations on public benchmarks reveal that our pre-trained representations surpass existing methods in predicting molecular properties and modeling dynamics.

Joint spectral measurements are a powerful tool for characterising biphoton spectral correlation, which is crucial for quantum information and communication technologies. In these applications, highly pure biphoton states are essential in any time- and frequency-mode, often obviating the need for time-resolved measurements. Conversely, spectroscopy utilising entangled photon pairs is gaining significant attention for its ability to unveil molecular dynamics, a field that critically demands time-resolved capabilities. Here, we introduce a methodology for capturing a biphoton spectrum that comprises visible and near-infrared photons, resulting in a highly non-degenerate joint spectrum. Our system employs two non-scanning spectrographs: a fibre spectrometer for near-infrared photons and a delay-line-anode single-photon imager for visible photons. We successfully measure the joint spectral intensity by leveraging a time-tagging acquisition strategy. Furthermore, our approach uniquely enables time-resolved joint spectral measurements with respect to the laser synchronisation against the hundreds-of-picosecond instrument response function. Our methodology could advance heralded fluorescence spectroscopy using biphoton sources to investigate temporal dynamics of complex biological, chemical, and physical systems.

High-accuracy microwave sensing is widely demanded in various fields, ranging from cosmology to microwave quantum technology. Quantum receivers based on inorganic solid-state spin systems are promising candidates for such purpose because of the stability and compatibility, but their best sensitivity is currently limited to a few pT/rm{Hz}. Here, by utilising an enhanced readout scheme with the state-of-the-art solid-state maser technology, we develop a robust microwave quantum receiver functioned by organic molecular spins at ambient conditions. Owing to the maser amplification, the sensitivity of the receiver achieves 6.14 pm 0.17 fT/rm{Hz} which exceeds three orders of magnitude than that of the inorganic solid-state quantum receivers. The heterodyne detection without additional local oscillators improves bandwidth of the receiver and allows frequency detection. The scheme can be extended to other solid-state spin systems without complicated control pulses and thus enables practical applications such as electron spin resonance spectroscopy, dark matter searches, and astronomical observations.

The detection of fractionally charged quasiparticles, which arise in the fractional quantum Hall regime, is of fundamental importance for probing their exotic quantum properties. While electronic interferometers have been central to probe their statistical properties, their interpretation is often complicated by bulk-edge interactions. Antidots, potential hills in the quantum Hall regime, are particularly valuable in this context, as they overcome the geometric limitations of conventional designs and act as controlled impurities within a quantum point contact. Furthermore, antidots allow for quasiparticle charge detection through straightforward conductance measurements, replacing the need for more demanding techniques. In this work, we employ a gate-defined bilayer graphene antidot operating in the Coulomb-dominated regime to study quasiparticle tunneling in both integer and fractional quantum Hall states. We show that the gate-voltage period and the oscillation slope directly reveal the charge of the tunneling quasiparticles, providing a practical method to measure fractional charge in graphene. We report direct measurements of fractional charge, finding q = e/3 at ν= 4/3, 5/3 and 7/3, q = 2e/3 at ν= 2/3 and q = 3e/5 at ν= 3/5, while at ν= 8/3 we observe signatures of both e/3 and 2e/3 tunneling charge. The simplicity and tunability of this design open a pathway to extend antidot-based charge measurements to other van der Waals materials, establishing antidots as a powerful and broadly applicable platform to study the quantum Hall effect.

scqubits is an open-source Python package for simulating and analyzing superconducting circuits. It provides convenient routines to obtain energy spectra of common superconducting qubits, such as the transmon, fluxonium, flux, cos(2ϕ) and the 0-π qubit. scqubits also features a number of options for visualizing the computed spectral data, including plots of energy levels as a function of external parameters, display of matrix elements of various operators as well as means to easily plot qubit wavefunctions. Many of these tools are not limited to single qubits, but extend to composite Hilbert spaces consisting of coupled superconducting qubits and harmonic (or weakly anharmonic) modes. The library provides an extensive suite of methods for estimating qubit coherence times due to a variety of commonly considered noise channels. While all functionality of scqubits can be accessed programatically, the package also implements GUI-like widgets that, with a few clicks can help users both create relevant Python objects, as well as explore their properties through various plots. When applicable, the library harnesses the computing power of multiple cores via multiprocessing. scqubits further exposes a direct interface to the Quantum Toolbox in Python (QuTiP) package, allowing the user to efficiently leverage QuTiP's proven capabilities for simulating time evolution.

This work describes the theoretical foundation for all quantum chemistry functionality in PennyLane, a quantum computing software library specializing in quantum differentiable programming. We provide an overview of fundamental concepts in quantum chemistry, including the basic principles of the Hartree-Fock method. A flagship feature in PennyLane is the differentiable Hartree-Fock solver, allowing users to compute exact gradients of molecular Hamiltonians with respect to nuclear coordinates and basis set parameters. PennyLane provides specialized operations for quantum chemistry, including excitation gates as Givens rotations and templates for quantum chemistry circuits. Moreover, built-in simulators exploit sparse matrix techniques for representing molecular Hamiltonians that lead to fast simulation for quantum chemistry applications. In combination with PennyLane's existing methods for constructing, optimizing, and executing circuits, these methods allow users to implement a wide range of quantum algorithms for quantum chemistry. We discuss how PennyLane can be used to implement variational algorithms for calculating ground-state energies, excited-state energies, and energy derivatives, all of which can be differentiated with respect to both circuit and Hamiltonian parameters. We provide an example workflow describing how to jointly optimize circuit parameters, nuclear coordinates, and basis set parameters for quantum chemistry algorithms. We discuss a functionality for reducing the number of qubits by using symmetries and explain how PennyLane can be used to estimate quantum resources needed to implement several quantum algorithms. By combining insights from quantum computing, computational chemistry, and machine learning, PennyLane is the first library for differentiable quantum computational chemistry.

Accurate determination of qubit parameters is critical for the successful implementation of quantum information and computation applications. In solid state systems, the parameters of individual qubits vary across the entire system, requiring time consuming measurements and manual fitting processes for characterization. Recent developed superconducting qubits, such as fluxonium or 0-pi qubits, offer improved fidelity operations but exhibit a more complex physical and spectral structure, complicating parameter extraction. In this work, we propose a machine learning (ML)based methodology for the automatic and accurate characterization of fluxonium qubit parameters. Our approach utilized the energy spectrum calculated by a model Hamiltonian with various magnetic fields, as training data for the ML model. The output consists of the essential fluxonium qubit energy parameters, EJ, EC, and EL in Hamiltonian. The ML model achieves remarkable accuracy (with an average accuracy 95.6%) as an initial guess, enabling the development of an automatic fitting procedure for direct application to realistic experimental data. Moreover, we demonstrate that similar accuracy can be retrieved even when the input experimental spectrum is noisy or incomplete, highlighting the model robustness. These results suggest that our automated characterization method, based on a transfer learning approach, provides a reliable framework for future extensions to other superconducting qubits or different solid-state systems. Ultimately, we believe this methodology paves the way for the construction of large-scale quantum processors.

Raman spectroscopy is a key tool for graphene characterization, yet its application to graphene grown on silicon carbide (SiC) is strongly limited by the intense and variable second-order Raman response of the substrate. This limitation is critical for buffer layer graphene, a semiconducting interfacial phase, whose vibrational signatures are overlapped with the SiC background and challenging to be reliably accessed using conventional reference-based subtraction, due to strong spatial and experimental variability of the substrate signal. Here we present SpectraFormer, a transformer-based deep learning model that reconstructs the SiC Raman substrate contribution directly from post-growth partially masked spectroscopic data without relying on explicit reference measurements. By learning global correlations across the entire Raman shift range, the model captures the statistical structure of the SiC background and enables accurate reconstruction of its contribution in mixed spectra. Subtraction of the reconstructed substrate signal reveals weak vibrational features associated with ZLG that are inaccessible through conventional analysis methods. The extracted spectra are validated by ab initio vibrational calculations, allowing assignment of the resolved features to specific modes and confirming their physical consistency. By leveraging a state-of-the-art attention-based deep learning architecture, this approach establishes a robust, reference-free framework for Raman analysis of graphene on SiC and provides a foundation, compatible with real-time data acquisition, to its integration into automated, closed-loop AI-assisted growth optimization.

Machine learning techniques are essential tools to compute efficient, yet accurate, force fields for atomistic simulations. This approach has recently been extended to incorporate quantum computational methods, making use of variational quantum learning models to predict potential energy surfaces and atomic forces from ab initio training data. However, the trainability and scalability of such models are still limited, due to both theoretical and practical barriers. Inspired by recent developments in geometric classical and quantum machine learning, here we design quantum neural networks that explicitly incorporate, as a data-inspired prior, an extensive set of physically relevant symmetries. We find that our invariant quantum learning models outperform their more generic counterparts on individual molecules of growing complexity. Furthermore, we study a water dimer as a minimal example of a system with multiple components, showcasing the versatility of our proposed approach and opening the way towards larger simulations. Our results suggest that molecular force fields generation can significantly profit from leveraging the framework of geometric quantum machine learning, and that chemical systems represent, in fact, an interesting and rich playground for the development and application of advanced quantum machine learning tools.

Ultrafast electron microscopy (UEM) has found widespread applications in physics, chemistry, and materials science, enabling real-space imaging of dynamics on ultrafast timescales. Recent advances have pushed the temporal resolution of UEM into the attosecond regime, enabling the attomicroscopy technique to directly visualize electron motion. In this work, we extend the capabilities of this powerful imaging tool to investigate ultrafast electron dynamics in a biological system by imaging and controlling light induced electronic and chemical changes in the conductive network of multicellular cable bacteria. Using electron energy loss spectroscopy (EELS), we first observed a laser induced increase in {\pi}-electron density, accompanied by spectral peak broadening and a blueshift features indicative of enhanced conductivity and structural modification. We also traced the effect of ultrafast laser pumping on bulk plasmon electron oscillations by monitoring changes in the plasmon like resonance peak. Additionally, we visualized laser induced chemical structural changes in cable bacteria in real space. The imaging results revealed carbon enrichment alongside a depletion of nitrogen and oxygen, highlighting the controllability of chemical dynamics. Moreover, time resolved EELS measurements further revealed a picosecond scale decay and recovery of both {\pi}-electron and plasmonic features, attributed to electron phonon coupling. In addition to shedding light on the mechanism of electron motion in cable bacteria, these findings demonstrate ultrafast modulation and switching of conductivity, underscoring their potential as bio-optoelectronic components operating on ultrafast timescales.

Isotopic substitution in molecular systems can affect fundamental molecular properties including the energy position and spacing of electronic, vibrational and rotational levels, thus modifying the dynamics associated to their coherent superposition. In extreme ultraviolet spectroscopy, the photoelectron leaving the molecule after the absorption of a single photon can trigger an ultrafast nuclear motion in the cation, which can lead, eventually, to molecular fragmentation. This dynamics depends on the mass of the constituents of the cation, thus showing, in general, a significant isotopic dependence. In time-resolved attosecond photoelectron interferometry, the absorption of the extreme ultraviolet photon is accompanied by the exchange of an additional quantum of energy (typically in the infrared spectral range) with the photoelectron-photoion system, offering the opportunity to investigate in time the influence of isotopic substitution on the characteristics of the photoionisation dynamics. Here we show that attosecond photoelectron interferometry is sensitive to isotopic substitution by investigating the two-color photoionisation spectra measured in a mixture of methane (CH_4) and deuteromethane (CD_4). The isotopic dependence manifests itself in the modification of the amplitude and contrast of the oscillations of the photoelectron peaks generated in the two-color field with the two isotopologues. The observed effects are interpreted considering the differences in the time evolution of the nuclear autocorrelation functions in the two molecules.

The key challenge in advancing multivalent-ion batteries lies in finding suitable intercalation hosts. Open-tunnel oxides, featuring one-dimensional channels or nanopores, show promise for enabling effective ion transport. However, the vast range of compositional possibilities renders traditional experimental and quantum-based methods impractical for large-scale studies. This work presents a generative AI framework that uses the Crystal Diffusion Variational Autoencoder (CDVAE) and a fine-tuned Large Language Model (LLM) to expedite the discovery of stable open-tunneled oxide materials for multivalent-ion batteries. By combining machine learning with data mining techniques, five promising transition metal oxide (TMO) structures are generated. These structures, known for forming open-tunnel oxide frameworks, are structurally validated through Density Functional Theory (DFT). The results show that the generated structures have lower formation energies compared to similar compositions in the Materials Project (MP) database, indicating improved thermodynamic stability. Additionally, the graph-based M3GNet model is employed to relax further generated structures, providing a more computationally efficient alternative to DFT. Machine learning-based predictions of formation energy, band gap, and energy above the hull refine the selection process, leading to the identification of materials with significant potential for real-world battery applications. This research demonstrates the power of generative AI in rapidly exploring the vast chemical space of TMOs, offering a new approach to discovering stable open-tunnel oxides for multivalent-ion batteries. The results highlight the potential of this approach to contribute to more sustainable energy storage technologies, addressing the growing concerns surrounding the scarcity of lithium.

Two-dimensional (2D) materials have emerged as a versatile and powerful platform for quantum technologies, offering atomic-scale control, strong quantum confinement, and seamless integration into heterogeneous device architectures. Their reduced dimensionality enables unique quantum phenomena, including optically addressable spin defects, tunable single-photon emitters, low-dimensional magnetism, gate-controlled superconductivity, and correlated states in Moiré superlattices. This Roadmap provides a comprehensive overview of recent progress and future directions in exploiting 2D materials for quantum sensing, computation, communication, and simulation. We survey advances spanning spin defects and quantum sensing, quantum emitters and nonlinear photonics, computational theory and data-driven discovery of quantum defects, spintronic and magnonic devices, cavity-engineered quantum materials, superconducting and hybrid quantum circuits, quantum dots, Moiré quantum simulators, and quantum communication platforms. Across these themes, we identify common challenges in defect control, coherence preservation, interfacial engineering, and scalable integration, alongside emerging opportunities driven by machine-learning-assisted design and integrated experiment-theory feedback loops. By connecting microscopic quantum states to mesoscopic excitations and macroscopic device architectures, this Roadmap outlines a materials-centric framework for integrating coherent quantum functionalities and positions 2D materials as foundational building blocks for next-generation quantum technologies.

Standing as one of the most significant barriers to reaching quantum advantage, state-preparation fidelities on noisy intermediate-scale quantum processors suffer from quantum-gate errors, which accumulate over time. A potential remedy is pulse-based state preparation. We numerically investigate the minimal evolution times (METs) attainable by optimizing (microwave and exchange) pulses on silicon hardware. We investigate two state preparation tasks. First, we consider the preparation of molecular ground states and find the METs for H_2, HeH^+, and LiH to be 2.4 ns, 4.4 ns, and 27.2 ns, respectively. Second, we consider transitions between arbitrary states and find the METs for transitions between arbitrary four-qubit states to be below 50 ns. For comparison, connecting arbitrary two-qubit states via one- and two-qubit gates on the same silicon processor requires approximately 200 ns. This comparison indicates that pulse-based state preparation is likely to utilize the coherence times of silicon hardware more efficiently than gate-based state preparation. Finally, we quantify the effect of silicon device parameters on the MET. We show that increasing the maximal exchange amplitude from 10 MHz to 1 GHz accelerates the METs, e.g., for H_2 from 84.3 ns to 2.4 ns. This demonstrates the importance of fast exchange. We also show that increasing the maximal amplitude of the microwave drive from 884 kHz to 56.6 MHz shortens state transitions, e.g., for two-qubit states from 1000 ns to 25 ns. Our results bound both the state-preparation times for general quantum algorithms and the execution times of variational quantum algorithms with silicon spin qubits.

Large-amplitude molecular motions which occur during isomerization can cause significant changes in electronic structure. These variations in electronic properties can be used to identify vibrationally-excited eigenstates which are localized along the potential energy surface. This work demonstrates that nuclear quadrupole hyperfine interactions can be used as a diagnostic marker of progress along the isomerization path in both the HC14N/H14NC and DC15N/D15NC chemical systems. Ab initio calculations at the CCSD(T)/cc-pCVQZ level indicate that the hyperfine interaction is extremely sensitive to the chemical bonding of the quadrupolar 14N nucleus and can therefore be used to determine in which potential well the vibrational wavefunction is localized. A natural bonding orbital analysis along the isomerization path further demonstrates that hyperfine interactions arise from the asphericity of the electron density at the quadrupolar nucleus. Using the CCSD(T) potential surface, the quadrupole coupling constants of highly-excited vibrational states are computed from a one-dimensional internal coordinate path Hamiltonian. The excellent agreement between ab initio calculations and recent measurements demonstrates that nuclear quadrupole hyperfine structure can be used as a diagnostic tool for characterizing localized HCN and HNC vibrational states.

Genuine quantum-mechanical effects are readily observable in modern optomechanical systems comprising bosonic ("classical") optical resonators. Here we describe unique features and advantages of optical two-level systems, or qubits, for optomechanics. The qubit state can be coherently controlled using both phonons and resonant or detuned photons. We experimentally demonstrate this using charge-controlled InAs quantum dots (QDs) in surface-acoustic-wave resonators. Time-correlated single-photon counting measurements reveal the control of QD population dynamics using engineered optical pulses and mechanical motion. As a first example, at moderate acoustic drive strengths, we demonstrate the potential of this technique to maximize fidelity in quantum microwave-to-optical transduction. Specifically, we tailor the scheme so that mechanically assisted photon scattering is enhanced over the direct detuned photon scattering from the QD. Spectral analysis reveals distinct scattering channels related to Rayleigh scattering and luminescence in our pulsed excitation measurements which lead to time-dependent scattering spectra. Quantum-mechanical calculations show good agreement with our experimental results, together providing a comprehensive description of excitation, scattering and emission in a coupled QD-phonon optomechanical system.

Accurate prediction of bond dissociation energies (BDEs) underpins mechanistic insight and the rational design of molecules and materials. We present a systematic, reproducible benchmark comparing quantum and classical machine learning models for BDE prediction using a chemically curated feature set encompassing atomic properties (atomic numbers, hybridization), bond characteristics (bond order, type), and local environmental descriptors. Our quantum framework, implemented in Qiskit Aer on six qubits, employs ZZFeatureMap encodings with variational ansatz (RealAmplitudes) across multiple architectures Variational Quantum Regressors (VQR), Quantum Support Vector Regressors (QSVR), Quantum Neural Networks (QNN), Quantum Convolutional Neural Networks (QCNN), and Quantum Random Forests (QRF). These are rigorously benchmarked against strong classical baselines, including Support Vector Regression (SVR), Random Forests (RF), and Multi-Layer Perceptrons (MLP). Comprehensive evaluation spanning absolute and relative error metrics, threshold accuracies, and error distributions shows that top-performing quantum models (QCNN, QRF) match the predictive accuracy and robustness of classical ensembles and deep networks, particularly within the chemically prevalent mid-range BDE regime. These findings establish a transparent baseline for quantum-enhanced molecular property prediction and outline a practical foundation for advancing quantum computational chemistry toward near chemical accuracy.

We present a new method for generating emission spectra from polycyclic aromatic hydrocarbons (PAHs) in arbitrary radiation fields. We utilize the single-photon limit for PAH heating and emission to treat individual photon absorptions as independent events. This allows the construction of a set of single-photon emission "basis spectra" that can be scaled to produce an output emission spectrum given any input heating spectrum. We find that this method produces agreement with PAH emission spectra computed accounting for multi-photon effects to within simeq10% in the 3-20~{rm mu m} wavelength range for radiation fields with intensity U<100. We use this framework to explore the dependence of PAH band ratios on the radiation field spectrum across grain sizes, finding in particular a strong dependence of the 3.3 to 11.2~mum band ratio on radiation field hardness. A Python-based tool and a set of basis spectra that can be used to generate these emission spectra are made publicly available.

Quantum simulation of many-body systems in materials science and chemistry are promising application areas for quantum computers. However, the limited scale and coherence of near-term quantum processors pose a significant obstacle to realizing this potential. Here, we theoretically outline how a single-circuit quantum electrodynamics (cQED) device, consisting of a transmon qubit coupled to a long-lived cavity mode, can be used to simulate the ground state of a highly-entangled quantum many-body spin chain. We exploit recently developed methods for implementing quantum operations to sequentially build up a matrix product state (MPS) representation of a many-body state. This approach re-uses the transmon qubit to read out the state of each spin in the chain and exploits the large state space of the cavity as a quantum memory encoding inter-site correlations and entanglement. We show, through simulation, that analog (pulse-level) control schemes can accurately prepare a known MPS representation of a quantum critical spin chain in significantly less time than digital (gate-based) methods, thereby reducing the exposure to decoherence. We then explore this analog-control approach for the variational preparation of an unknown ground state. We demonstrate that the large state space of the cavity can be used to replace multiple qubits in a qubit-only architecture, and could therefore simplify the design of quantum processors for materials simulation. We explore the practical limitations of realistic noise and decoherence and discuss avenues for scaling this approach to more complex problems that challenge classical computational methods.

Quantum many-body methods provide a systematic route to computing electronic properties of molecules and materials, but high computational costs restrict their use in large-scale applications. Due to the complexity in many-electron wavefunctions, machine learning models capable of capturing fundamental many-body physics remain limited. Here, we present a deep learning framework targeting the many-body Green's function, which unifies predictions of electronic properties in ground and excited states, while offering physical insights into many-electron correlation effects. By learning the GW or coupled-cluster self-energy from mean-field features, our graph neural network achieves competitive performance in predicting one- and two-particle excitations and quantities derivable from one-particle density matrix. We demonstrate its high data efficiency and good transferability across chemical species, system sizes, molecular conformations, and correlation strengths in bond breaking, through multiple molecular and nanomaterial benchmarks. This work opens up opportunities for utilizing machine learning to solve many-electron problems.

Solid-state quantum emitters have emerged as a leading quantum memory for quantum networking applications. However, standard optical characterization techniques are neither efficient nor repeatable at scale. In this work, we introduce and demonstrate spectroscopic techniques that enable large-scale, automated characterization of color centers. We first demonstrate the ability to track color centers by registering them to a fabricated machine-readable global coordinate system, enabling systematic comparison of the same color center sites over many experiments. We then implement resonant photoluminescence excitation in a widefield cryogenic microscope to parallelize resonant spectroscopy, achieving two orders of magnitude speed-up over confocal microscopy. Finally, we demonstrate automated chip-scale characterization of color centers and devices at room temperature, imaging thousands of microscope fields of view. These tools will enable accelerated identification of useful quantum emitters at chip-scale, enabling advances in scaling up color center platforms for quantum information applications, materials science, and device design and characterization.

Atomically thin metallic chains serve as pivotal systems for studying quantum transport, with their conductance strongly linked to the orbital picture. Here, we report a non-monotonic electro-mechanical response in a gold-ferrocene junction, characterized by an unexpected conductance increase over a factor of ten upon stretching. This response is detected in the formation of ferrocene-assisted atomic gold chain in a mechanically controllable break junction at a cryogenic temperature. DFT based calculations show that tilting of molecules inside the chain modifies the orbital overlap and the transmission spectra, leading to such non-monotonic conductance evolution with stretching. This behavior, unlike typical flat conductance plateaus observed in metal atomic chains, pinpoints the unique role of conformational rearrangements during chain elongation. Our findings provide a deeper understanding of the role of orbital hybridization in transport properties and offer new opportunities for designing nanoscale devices with tailored electro-mechanical characteristics.

Variational quantum eigensolvers (VQEs) are among the most promising quantum algorithms for solving electronic structure problems in quantum chemistry, particularly during the Noisy Intermediate-Scale Quantum (NISQ) era. In this study, we investigate the capabilities and limitations of VQE algorithms implemented on current quantum hardware for determining molecular ground-state energies, focusing on the adaptive derivative-assembled pseudo-Trotter ansatz VQE (ADAPT-VQE). To address the significant computational challenges posed by molecular Hamiltonians, we explore various strategies to simplify the Hamiltonian, optimize the ansatz, and improve classical parameter optimization through modifications of the COBYLA optimizer. These enhancements are integrated into a tailored quantum computing implementation designed to minimize the circuit depth and computational cost. Using benzene as a benchmark system, we demonstrate the application of these optimizations on an IBM quantum computer. Despite these improvements, our results highlight the limitations imposed by current quantum hardware, particularly the impact of quantum noise on state preparation and energy measurement. The noise levels in today's devices prevent meaningful evaluations of molecular Hamiltonians with sufficient accuracy to produce reliable quantum chemical insights. Finally, we extrapolate the requirements for future quantum hardware to enable practical and scalable quantum chemistry calculations using VQE algorithms. This work provides a roadmap for advancing quantum algorithms and hardware toward achieving quantum advantage in molecular modeling.

Quantum many-body scars (QMBS) are exotic many-body states that exhibit anomalous non-thermal behavior in an otherwise ergodic system. In this work, we demonstrate a simple, scalable and intuitive construction of QMBS in a kinetically constrained quantum model exhibiting weak Hilbert space fragmentation. We show that exact QMBS can be constructed by injecting a quasiparticle that partially activates the frozen regions in the lattice. Meanwhile, the inelastic collision between multiple quasiparticles allows for the construction of approximate scars, whose damping is governed by an emergent two-body loss. Our findings establish direct connections between quantum many-body scarring and Hilbert space fragmentation, paving the way for systematically constructing exact and approximate QMBS with nontrivial spatial connectivity. The proposed model can be readily implemented in neutral-atom quantum simulators aided by strong Rydberg interactions.

A central challenge of the clean energy transition is the development of catalysts for low-emissions technologies. Recent advances in Machine Learning for quantum chemistry drastically accelerate the computation of catalytic activity descriptors such as adsorption energies. Here we introduce AdsorbRL, a Deep Reinforcement Learning agent aiming to identify potential catalysts given a multi-objective binding energy target, trained using offline learning on the Open Catalyst 2020 and Materials Project data sets. We experiment with Deep Q-Network agents to traverse the space of all ~160,000 possible unary, binary and ternary compounds of 55 chemical elements, with very sparse rewards based on adsorption energy known for only between 2,000 and 3,000 catalysts per adsorbate. To constrain the actions space, we introduce Random Edge Traversal and train a single-objective DQN agent on the known states subgraph, which we find strengthens target binding energy by an average of 4.1 eV. We extend this approach to multi-objective, goal-conditioned learning, and train a DQN agent to identify materials with the highest (respectively lowest) adsorption energies for multiple simultaneous target adsorbates. We experiment with Objective Sub-Sampling, a novel training scheme aimed at encouraging exploration in the multi-objective setup, and demonstrate simultaneous adsorption energy improvement across all target adsorbates, by an average of 0.8 eV. Overall, our results suggest strong potential for Deep Reinforcement Learning applied to the inverse catalysts design problem.

Single molecule junctions exhibit dynamic structural configurations that strongly influence their electronic and thermoelectric properties. Here, we combine conductance (G) and Seebeck coefficient (S) measurements using the novel AC based scanning tunnelling microscope break junction technique to probe the real-time evolution of oligo(phenylene ethynylene) molecular junctions. We show that most junctions undergo configuration changes that lead to notable changes in S while G remains nearly constant. Density functional theory and quantum transport simulations link these observations to variations in contact geometry and charge transfer at the molecule electrode interface. Our results demonstrate that simultaneous G and S measurements enable direct access to the dynamic reconfiguration of single molecule junctions and offer design insights for thermoelectric molecular devices and new routes for increasing single molecule junction stability.

Chemically accurate and comprehensive studies of the virtual space of all possible molecules are severely limited by the computational cost of quantum chemistry. We introduce a composite strategy that adds machine learning corrections to computationally inexpensive approximate legacy quantum methods. After training, highly accurate predictions of enthalpies, free energies, entropies, and electron correlation energies are possible, for significantly larger molecular sets than used for training. For thermochemical properties of up to 16k constitutional isomers of C_7H_{10}O_2 we present numerical evidence that chemical accuracy can be reached. We also predict electron correlation energy in post Hartree-Fock methods, at the computational cost of Hartree-Fock, and we establish a qualitative relationship between molecular entropy and electron correlation. The transferability of our approach is demonstrated, using semi-empirical quantum chemistry and machine learning models trained on 1 and 10\% of 134k organic molecules, to reproduce enthalpies of all remaining molecules at density functional theory level of accuracy.

We show how superconductors can be used to couple, initialize, and read out spatially separated spin qubits. When two single-electron quantum dots are tunnel coupled to the same superconductor, the singlet component of the two-electron state partially leaks into the superconductor via crossed Andreev reflection. This induces a gate-controlled singlet-triplet splitting which, with an appropriate superconductor geometry, remains large for dot separations within the superconducting coherence length. Furthermore, we show that when two double-dot singlet-triplet qubits are tunnel coupled to a superconductor with finite charging energy, crossed Andreev reflection enables a strong two-qubit coupling over distances much larger than the coherence length.

The binding energies of the five bound rotational levels J=0-4 in the highest vibrational level v=14 in the X^1Sigma_g^+ ground electronic state of H_2 were measured in a three-step ultraviolet-laser experiment. Two-photon UV-photolysis of H_2S produced population in these high-lying bound states, that were subsequently interrogated at high precision via Doppler-free spectroscopy of the F^1Sigma_g^+ - X^1Sigma_g^+ system. A third UV-laser was used for detection through auto-ionizing resonances. The experimentally determined binding energies were found to be in excellent agreement with calculations based on non-adiabatic perturbation theory, also including relativistic and quantum electrodynamical contributions. The s-wave scattering length of the H + H system is derived from the binding energy of the last bound J=0 level via a direct semi-empirical approach, yielding a value of a_s = 0.2724(5) a_0, in good agreement with a result from a previously followed theoretical approach. The subtle effect of the malpha^4 relativity contribution to a_s was found to be significant. In a similar manner a value for the p-wave scattering volume is determined via the J=1 binding energy yielding a_p = -134.0000(6) a_0^3. The binding energy of the last bound state in H_2, the (v=14, J=4) level, is determined at 0.023(4) cm^{-1}, in good agreement with calculation. The effect of the hyperfine substructure caused by the two hydrogen atoms at large internuclear separation, giving rise to three distinct dissociation limits, is discussed.

Exotic hadrons are a new class of hadronic states whose properties do not allow them to be classified as conventional quark-antiquark mesons or three quark baryons. Finding new and understanding established exotic states is the most important topic in today's hadron spectroscopy and a promising avenue to advance our knowledge on Quantum Chromodynamics in the non-perturbative regime. While several high-quality reviews on the topic exist, they are all at an advanced level. The present article aims to address new-comers to the field with a simple introduction to exotic hadrons with an emphasis on the experimental studies.

Recent developments in deep learning have made remarkable progress in speeding up the prediction of quantum chemical (QC) properties by removing the need for expensive electronic structure calculations like density functional theory. However, previous methods learned from 1D SMILES sequences or 2D molecular graphs failed to achieve high accuracy as QC properties primarily depend on the 3D equilibrium conformations optimized by electronic structure methods, far different from the sequence-type and graph-type data. In this paper, we propose a novel approach called Uni-Mol+ to tackle this challenge. Uni-Mol+ first generates a raw 3D molecule conformation from inexpensive methods such as RDKit. Then, the raw conformation is iteratively updated to its target DFT equilibrium conformation using neural networks, and the learned conformation will be used to predict the QC properties. To effectively learn this update process towards the equilibrium conformation, we introduce a two-track Transformer model backbone and train it with the QC property prediction task. We also design a novel approach to guide the model's training process. Our extensive benchmarking results demonstrate that the proposed Uni-Mol+ significantly improves the accuracy of QC property prediction in various datasets. We have made the code and model publicly available at https://github.com/dptech-corp/Uni-Mol.

The combination of modern scientific computing with electronic structure theory can lead to an unprecedented amount of data amenable to intelligent data analysis for the identification of meaningful, novel, and predictive structure-property relationships. Such relationships enable high-throughput screening for relevant properties in an exponentially growing pool of virtual compounds that are synthetically accessible. Here, we present a machine learning (ML) model, trained on a data base of ab initio calculation results for thousands of organic molecules, that simultaneously predicts multiple electronic ground- and excited-state properties. The properties include atomization energy, polarizability, frontier orbital eigenvalues, ionization potential, electron affinity, and excitation energies. The ML model is based on a deep multi-task artificial neural network, exploiting underlying correlations between various molecular properties. The input is identical to ab initio methods, i.e. nuclear charges and Cartesian coordinates of all atoms. For small organic molecules the accuracy of such a "Quantum Machine" is similar, and sometimes superior, to modern quantum-chemical methods---at negligible computational cost.

In the context of quantum thermodynamics, quantum batteries have emerged as promising devices for energy storage and manipulation. Over the past decade, substantial progress has been made in understanding the fundamental properties of quantum batteries, with several experimental implementations showing great promise. This Perspective provides an overview of the solid-state materials platforms that could lead to fully operational quantum batteries. After briefly introducing the basic features of quantum batteries, we discuss organic microcavities, where superextensive charging has already been demonstrated experimentally. We then explore other materials, including inorganic nanostructures (such as quantum wells and dots), perovskite systems, and (normal and high-temperature) superconductors. Key achievements in these areas, relevant to the experimental realization of quantum batteries, are highlighted. We also address challenges and future research directions. Despite their enormous potential for energy storage devices, research into advanced materials for quantum batteries is still in its infancy. This paper aims to stimulate interdisciplinarity and convergence among different materials science research communities to accelerate the development of new materials and device architectures for quantum batteries.

Advances in research have sparked an increasing curiosity in understanding the plasmonic excitation properties of molecular-scale systems. Polycyclic aromatic hydrocarbons, as the fundamental building blocks of graphene, have been documented to possess plasmonic properties through experimental observations, making them prime candidates for investigation. By doping different elements, the conjugated structure of the molecule can be altered. In this study, the plasmonic excitation properties influenced by conjugated structures in peropyrene and its derivatives are investigated through first-principles calculations that combine the plasmonicity index, generalized plasmonicity index and transition contribution maps. For molecular plasmonic excitation, the conjugated structure can influence the oscillation modes of valence electrons, which is pivotal in yielding distinct field enhancement characteristics. Furthermore, charge doping can lead to a certain degree of alteration in the conjugated structures, and the doping of elements will result in varying degrees of such alteration, thereby initiating different trends in the evolution of plasmonic resonance. This further enhances the tunability of molecular plasmonic resonance. The results provide novel insights into the development and utilization of molecular plasmonic devices in practical applications.

Supervised machine learning approaches have been increasingly used in accelerating electronic structure prediction as surrogates of first-principle computational methods, such as density functional theory (DFT). While numerous quantum chemistry datasets focus on chemical properties and atomic forces, the ability to achieve accurate and efficient prediction of the Hamiltonian matrix is highly desired, as it is the most important and fundamental physical quantity that determines the quantum states of physical systems and chemical properties. In this work, we generate a new Quantum Hamiltonian dataset, named as QH9, to provide precise Hamiltonian matrices for 999 or 2998 molecular dynamics trajectories and 130,831 stable molecular geometries, based on the QM9 dataset. By designing benchmark tasks with various molecules, we show that current machine learning models have the capacity to predict Hamiltonian matrices for arbitrary molecules. Both the QH9 dataset and the baseline models are provided to the community through an open-source benchmark, which can be highly valuable for developing machine learning methods and accelerating molecular and materials design for scientific and technological applications. Our benchmark is publicly available at https://github.com/divelab/AIRS/tree/main/OpenDFT/QHBench.

Second-quantized neural-network quantum states have achieved accurate molecular energies, but extending them across molecular geometries requires a shared representation of the geometry-dependent wavefunction coefficients. We introduce geometry-conditioned foundation neural-network quantum states for molecular electronic structure in second quantization. A single autoregressive model learns a family of ground states from sparse anchor geometries and provides wavefunctions at untrained geometries without further optimization. Orbital alignment matches orbital identities and transports their phases, establishing an aligned orbital basis across geometries. Frozen energies reach chemical accuracy at every untrained query geometry for N_2, CO, and H_4. On additional molecular paths, the energy-trained wavefunctions yield dipoles, quadrupoles, and natural occupations without property labels. Across three paired N_2 training seeds, orbital alignment lowers the mean absolute energy error over all untrained query geometries from 34-37 mHa to 0.049-0.085 mHa. At approximately 1 mHa mean absolute error, frozen evaluation reduces the per-geometry cost by 986times relative to independent optimization, yielding an estimated 25.8times end-to-end GPU-cost reduction on a 161-point N_2 grid.

We introduce the generative quantum eigensolver (GQE), a new quantum computational framework that operates outside the variational quantum algorithm paradigm by applying classical generative models to quantum simulation. The GQE algorithm optimizes a classical generative model to produce quantum circuits with desired properties. Here, we develop a transformer-based implementation, which we name the generative pre-trained transformer-based (GPT) quantum eigensolver (GPT-QE). We show a proof-of-concept of training and pretraining of GPT-QE applied to electronic structure Hamiltonians, and demonstrate its ability illustrated by surpassing coupled cluster singles and doubles (CCSD) for the strong bond dissociation of the nitrogen molecule and approaching chemical accuracy. We also demonstrate the method on real quantum hardware.

Compound identification and structure annotation from mass spectra is a well-established task widely applied in drug detection, criminal forensics, small molecule biomarker discovery and chemical engineering. We propose SpecTUS: Spectral Translator for Unknown Structures, a deep neural model that addresses the task of structural annotation of small molecules from low-resolution gas chromatography electron ionization mass spectra (GC-EI-MS). Our model analyzes the spectra in de novo manner -- a direct translation from the spectra into 2D-structural representation. Our approach is particularly useful for analyzing compounds unavailable in spectral libraries. In a rigorous evaluation of our model on the novel structure annotation task across different libraries, we outperformed standard database search techniques by a wide margin. On a held-out testing set, including 28267 spectra from the NIST database, we show that our model's single suggestion perfectly reconstructs 43\% of the subset's compounds. This single suggestion is strictly better than the candidate of the database hybrid search (common method among practitioners) in 76\% of cases. In a~still affordable scenario of~10 suggestions, perfect reconstruction is achieved in 65\%, and 84\% are better than the hybrid search.

The nexus of quantum computing and machine learning - quantum machine learning - offers the potential for significant advancements in chemistry. This review specifically explores the potential of quantum neural networks on gate-based quantum computers within the context of drug discovery. We discuss the theoretical foundations of quantum machine learning, including data encoding, variational quantum circuits, and hybrid quantum-classical approaches. Applications to drug discovery are highlighted, including molecular property prediction and molecular generation. We provide a balanced perspective, emphasizing both the potential benefits and the challenges that must be addressed.

Variational optimization of neural-network representations of quantum states has been successfully applied to solve interacting fermionic problems. Despite rapid developments, significant scalability challenges arise when considering molecules of large scale, which correspond to non-locally interacting quantum spin Hamiltonians consisting of sums of thousands or even millions of Pauli operators. In this work, we introduce scalable parallelization strategies to improve neural-network-based variational quantum Monte Carlo calculations for ab-initio quantum chemistry applications. We establish GPU-supported local energy parallelism to compute the optimization objective for Hamiltonians of potentially complex molecules. Using autoregressive sampling techniques, we demonstrate systematic improvement in wall-clock timings required to achieve CCSD baseline target energies. The performance is further enhanced by accommodating the structure of resultant spin Hamiltonians into the autoregressive sampling ordering. The algorithm achieves promising performance in comparison with the classical approximate methods and exhibits both running time and scalability advantages over existing neural-network based methods.

Ultra-stable glasses prepared from the physical vapor deposition of organic molecules present a very low density of two-level states, the kind of glass defects that determine their peculiar low temperature thermal properties. Numerical simulations suggest that quasi-localized harmonic vibrational modes emerge in the soft regions associated with two-level states. However, the connection between the low frequency vibrational modes and the local structural instabilities of glasses remains unexplained. Here we exploit a recently developed spectrograph for nuclear resonant analysis of inelastic X-ray scattering to probe the density of vibrational states of amorphous thin films of ultra-stable and conventional glasses down to an exceptionally low frequency of sim 70 GHz. We show that the glass stability does not affect the harmonic vibrational modes at the lowest frequencies, despite a reduction of almost an order of magnitude in the density of two-level states. At the same time, the vibrational modes at higher frequencies, around the boson peak maximum, are extremely sensitive to the glass stability. Although we cannot exclude the possible existence of quasi-localized modes in glasses, we show that their presence is not strictly necessary to describe the measured density of low frequency vibrations. The experimental developments here presented pave the way to the solution to the long-standing debate on the low frequency vibrations in glasses.

Understanding electron irradiation effects is vital not only for reliable transmission electron microscopy characterization, but increasingly also for the controlled manipulation of two-dimensional materials. The displacement cross sections of monolayer hBN are measured using aberration-corrected scanning transmission electron microscopy in near ultra-high vacuum at primary beam energies between 50 and 90 keV. Damage rates below 80 keV are up to three orders of magnitude lower than previously measured at edges under poorer residual vacuum conditions where chemical etching appears to have been dominant. Notably, is possible to create single vacancies in hBN using electron irradiation, with boron almost twice as likely as nitrogen to be ejected below 80 keV. Moreover, any damage at such low energies cannot be explained by elastic knock-on, even when accounting for vibrations of the atoms. A theoretical description is developed to account for lowering of the displacement threshold due to valence ionization resulting from inelastic scattering of probe electrons, modelled using charge-constrained density functional theory molecular dynamics. Although significant reductions are found depending on the constrained charge, quantitative predictions for realistic ionization states are currently not possible. Nonetheless, there is potential for defect-engineering of hBN at the level of single vacancies using electron irradiation.

Silicon nitride has emerged as a promising photonic platform for integrated single-photon sources, yet the microscopic origin of the recently observed bright quantum emissions remains unclear. Using hybrid density functional theory, we show that the negatively charged N_SiV_N center (NV^{-}) in the C_{1h} configuration exhibits a linearly polarized zero-phonon line (ZPL) at 2.46 eV, with a radiative lifetime of 9.01 ns and a high Debye-Waller (DW) factor of 33%. We further find that the C_{1h} configuration is prone to a pseudo-Jahn-Teller distortion, yielding two symmetrically equivalent defect structures that emit bright, linearly polarized ZPL at 1.80 eV with a lifetime of 10.17 ns and an increased DW factor of 41%. These nitrogen-vacancy-related defects explain the origins of visible quantum emissions, paving the way for deterministic and monolithically integrated silicon-nitride quantum photonics.

One of the distinguishing aspects of CP2K is its seamless integration of diverse structural and transition-state optimization techniques with advanced sampling approaches including Monte Carlo, molecular dynamics, and metadynamics, enabling the efficient exploration of complex potential- and free-energy landscapes, including rare events. These capabilities are combined with a broad hierarchy of energy and force evaluation methods, ranging from classical and machine-learned interaction potentials and mixed quantum-classical multiscale and semiempirical schemes, to highly accurate quantum-mechanical electronic-structure approaches. At the heart of the latter lies the Gaussian and plane-wave framework, along with its augmented all-electron generalization, which have been described in detail in our previous code review [T. D. Kühne et al., J. Chem. Phys. 152, 194103 (2020)]. Building on this foundation, the present work revisits the methods within CP2K that turn electronic structure into dynamics, transport, and spectroscopic response. Particular emphasis is placed on the coupling between static response calculations and nuclear motion: spectra may be evaluated at optimized structures, averaged over thermally sampled configurations, obtained from time-correlation functions along ab-initio or path integral molecular trajectories, or followed in real time together with electronic and nuclear dynamics. The same modular structure also enables equilibrium and biased transport simulations, from Kubo-type linear response to open-boundary approaches under external potentials, highlighting CP2K's unique capability to unify quantum chemistry with quantum and statistical mechanics within a versatile, holistic simulation environment.

Polarization analysis in x-ray spectroscopy provides an orientation dependent sensitivity to local bonding environments. For a cluster of atoms, polarization sensitivity is most often discussed through the lens of point group symmetries. However, this is a discrete, qualitative method of classifying clusters, and it does little to indicate the degree of spectral anisotropy. Here we adopt a random forest model for quantitative prediction of spectral anisotropy. Its input relies on simplified local geometric and chemical information that can be obtained from any crystal structure file. The model is trained on over 10,000 experimentally realized transition metal structures from the Materials Project, with the target being VtC-XES calculated using the real space Green's function code FEFF. We find that the model can strongly predict the degree of spectral anisotropy, with the primary factors being derived from the spatial moments of ligands in a cluster.

Two-dimensional (2D) Nuclear Magnetic Resonance (NMR) spectroscopy, particularly Heteronuclear Single Quantum Coherence (HSQC) spectroscopy, plays a critical role in elucidating molecular structures, interactions, and electronic properties. However, accurately interpreting 2D NMR data remains labor-intensive and error-prone, requiring highly trained domain experts, especially for complex molecules. Machine Learning (ML) holds significant potential in 2D NMR analysis by learning molecular representations and recognizing complex patterns from data. However, progress has been limited by the lack of large-scale and high-quality annotated datasets. In this work, we introduce 2DNMRGym, the first annotated experimental dataset designed for ML-based molecular representation learning in 2D NMR. It includes over 22,000 HSQC spectra, along with the corresponding molecular graphs and SMILES strings. Uniquely, 2DNMRGym adopts a surrogate supervision setup: models are trained using algorithm-generated annotations derived from a previously validated method and evaluated on a held-out set of human-annotated gold-standard labels. This enables rigorous assessment of a model's ability to generalize from imperfect supervision to expert-level interpretation. We provide benchmark results using a series of 2D and 3D GNN and GNN transformer models, establishing a strong foundation for future work. 2DNMRGym supports scalable model training and introduces a chemically meaningful benchmark for evaluating atom-level molecular representations in NMR-guided structural tasks. Our data and code is open-source and available on Huggingface and Github.

Berry curvature physics and quantum geometric effects have been instrumental in advancing topological condensed matter physics in recent decades. Although Landau level-based flat bands and conventional 3D solids have been pivotal in exploring rich topological phenomena, they are constrained by their limited ability to undergo dynamic tuning. In stark contrast, moiré systems have risen as a versatile platform for engineering bands and manipulating the distribution of Berry curvature in momentum space. These moiré systems not only harbor tunable topological bands, modifiable through a plethora of parameters, but also provide unprecedented access to large length scales and low energy scales. Furthermore, they offer unique opportunities stemming from the symmetry-breaking mechanisms and electron correlations associated with the underlying flat bands that are beyond the reach of conventional crystalline solids. A diverse array of tools, encompassing quantum electron transport in both linear and non-linear response regimes and optical excitation techniques, provide direct avenues for investigating Berry physics. This review navigates the evolving landscape of tunable moiré materials, highlighting recent experimental breakthroughs in the field of topological physics. Additionally, we delineate several challenges and offer insights into promising avenues for future research.

The discovery of next-generation photoinitiators for two-photon polymerization (TPP) is hindered by the absence of large, open datasets containing the quantum-chemical and photophysical properties required to model photodissociation and excited-state behavior. Existing molecular datasets typically provide only basic physicochemical descriptors and therefore cannot support data-driven screening or AI-assisted design of photoinitiators. To address this gap, we introduce QuantumChem-200K, a large-scale dataset of over 200,000 organic molecules annotated with eleven quantum-chemical properties, including two-photon absorption (TPA) cross sections, TPA spectral ranges, singlet-triplet intersystem crossing (ISC) energies, toxicity and synthetic accessibility scores, hydrophilicity, solubility, boiling point, molecular weight, and aromaticity. These values are computed using a hybrid workflow that integrates density function theory (DFT), semi-empirical excited-state methods, atomistic quantum solvers, and neural-network predictors. Using QuantumChem-200K, we fine tune the open-source Qwen2.5-32B large language model to create a chemistry AI assistant capable of forward property prediction from SMILES. Benchmarking on 3000 unseen molecules from VQM24 and ZINC20 demonstrates that domain-specific fine-tuning significantly improves accuracy over GPT-4o, Llama-3.1-70B, and the base Qwen2.5-32B model, particularly for TPA and ISC predictions central to photoinitiator design. QuantumChem-200K and the corresponding AI assistant together provide the first scalable platform for high-throughput, LLM-driven photoinitiator screening and accelerated discovery of photosensitive materials.

We extend molecular bootstrap embedding to make it appropriate for implementation on a quantum computer. This enables solution of the electronic structure problem of a large molecule as an optimization problem for a composite Lagrangian governing fragments of the total system, in such a way that fragment solutions can harness the capabilities of quantum computers. By employing state-of-art quantum subroutines including the quantum SWAP test and quantum amplitude amplification, we show how a quadratic speedup can be obtained over the classical algorithm, in principle. Utilization of quantum computation also allows the algorithm to match -- at little additional computational cost -- full density matrices at fragment boundaries, instead of being limited to 1-RDMs. Current quantum computers are small, but quantum bootstrap embedding provides a potentially generalizable strategy for harnessing such small machines through quantum fragment matching.

The stacking-dependent polarization and excitonic response of MoS_2/MoSe_2 heterostructures were investigated using GW+BSE many-body perturbation theory. While homobilayer MoS_2 exhibited a switchable interlayer dipole driven by registry-induced symmetry breaking, the MoS_2/MoSe_2 hetero-interface remained pinned by the intrinsic chemical potential mismatch between sulfur and selenium. In 2L-MoS_2/MoSe_2 trilayers, the stacking sequence enabled a deterministic control of photogenerated electrons between the central and bottom MoS_2 layers, governed by internal electric fields and quasiparticle band-edge shifts of 60--70~meV. Our calculations predicted a 36~meV interlayer excitonic shift, in remarkable agreement with recent experiments. These results elucidate the microscopic link between atomic registry and many-body interactions, establishing transition metal dichalcogenide trilayers as a potential platform for sliding ferroelectricity and programmable optoelectronic functionalities.

To meet the challenges of high-resolution molecular spectroscopy, increasingly sophisticated spectroscopic techniques were developed. For a long time FTIR and laser-based spectroscopies were used for these studies. The recent development of dual-comb spectroscopy at high-resolution makes this technique a powerful tool for gas phase studies. We report on the use and characterization of the IRis-F1, a tabletop mid-infrared dual-comb spectrometer, in the newly developed step-sweep mode. The resolution of the wavenumber axis is increased by step-wise tuning (interleaving) and accurate measurement of the laser center wavelength and repetition frequency. Doppler limited measurements of N2O and CH4 reveal a wavenumber accuracy of 1E-4 cm-1 on the covered range of > 50 cm-1. Measured half-widths of absorption lines show no systematic broadening, indicating a negligible instrument response function. Finally, measurements of nitrogen pressure broadening coefficients in the v4 band of methane show that quantum cascade laser dual-comb spectroscopy in step-sweep mode is well adapted for measurements of precision spectroscopic data, in particular line shape parameters.

There will be a paradigm shift in chemical and biological research, to be enabled by autonomous, closed-loop, real-time self-directed decision-making experimentation. Spectrum-to-structure correlation, which is to elucidate molecular structures with spectral information, is the core step in understanding the experimental results and to close the loop. However, current approaches usually divide the task into either database-dependent retrieval and database-independent generation and neglect the inherent complementarity between them. In this study, we proposed Vib2Mol, a general deep learning model designed to flexibly handle diverse spectrum-to-structure tasks according to the available prior knowledge by bridging the retrieval and generation. It achieves state-of-the-art performance, even for the most demanding Raman spectra, over previous models in predicting reaction products and sequencing peptides as well as analyzing experimental spectra and integrating multi-modal spectral data. Vib2Mol enables vibrational spectroscopy a real-time guide for autonomous scientific discovery workflows.

Using {\em ab initio} density functional theory calculations, we characterize changes in the electronic structure of MoS_{2} monolayers introduced by missing or additional adsorbed sulfur atoms. We furthermore identify the chemical and electronic function of substances that have been reported to reduce the adverse effect of sulfur vacancies in quenching photoluminescence and reducing electronic conductance. We find that thiol-group containing molecules adsorbed at vacancy sites may re-insert missing sulfur atoms. In presence of additional adsorbed sulfur atoms, thiols may form disulfides on the MoS_{2} surface to mitigate the adverse effect of defects.

Versatile, tunable, and potentially scalable single-photon sources are a key asset in emergent photonic quantum technologies. In this work, a single-photon source based on WS_2 micro-domes, created via hydrogen ion irradiation, is realized and integrated into an open, tunable optical microcavity. Single-photon emission from the coupled emitter-cavity system is verified via the second-order correlation measurement, revealing a g^{(2)}(τ=0) value of 0.3. A detailed analysis of the spectrally selective, cavity enhanced emission features shows the impact of a pronounced acoustic phonon emission sideband, which contributes specifically to the non-resonant emitter-cavity coupling in this system. The achieved level of cavity-emitter control highlights the potential of open-cavity systems to tailor the emission properties of atomically thin quantum emitters, advancing their suitability for real-world quantum technology applications.

Generating novel molecules with out-of-distribution properties is a major challenge in molecular discovery. While supervised learning methods generate high-quality molecules similar to those in a dataset, they struggle to generalize to out-of-distribution properties. Reinforcement learning can explore new chemical spaces but often conducts 'reward-hacking' and generates non-synthesizable molecules. In this work, we address this problem by integrating a state-of-the-art supervised learning method, STGG+, in an active learning loop. Our approach iteratively generates, evaluates, and fine-tunes STGG+ to continuously expand its knowledge. We denote this approach STGG+AL. We apply STGG+AL to the design of organic pi-functional materials, specifically two challenging tasks: 1) generating highly absorptive molecules characterized by high oscillator strength and 2) designing absorptive molecules with reasonable oscillator strength in the near-infrared (NIR) range. The generated molecules are validated and rationalized in-silico with time-dependent density functional theory. Our results demonstrate that our method is highly effective in generating novel molecules with high oscillator strength, contrary to existing methods such as reinforcement learning (RL) methods. We open-source our active-learning code along with our Conjugated-xTB dataset containing 2.9 million pi-conjugated molecules and the function for approximating the oscillator strength and absorption wavelength (based on sTDA-xTB).

Electrical control of individual spins and photons in solids is key for quantum technologies, but scaling down to small, static systems remains challenging. Here, we demonstrate nanoscale electrical tuning of neutral and charged excitons in monolayer WSe2 using 1-nm carbon nanotube gates. Electrostatic simulations reveal a confinement radius below 15 nm, reaching the exciton Bohr radius limit for few-layer dielectric spacing. In situ photoluminescence spectroscopy shows gate-controlled conversion between neutral excitons, negatively charged trions, and biexcitons at 4 K. Important for quantum information processing applications, our measurements indicate gating of a local 2D electron gas in the WSe2 layer, coupled to photons via trion transitions with binding energies exceeding 20 meV. The ability to deterministically tune and address quantum emitters using nanoscale gates provides a pathway towards large-scale quantum optoelectronic circuits and spin-photon interfaces for quantum networking.

The discovery of topological quantum states marks a new chapter in both condensed matter physics and materials sciences. By analogy to spin electronic system, topological concepts have been extended into phonons, boosting the birth of topological phononics (TPs). Here, we present a high-throughput screening and data-driven approach to compute and evaluate TPs among over 10,000 materials. We have clarified 5014 TP materials and classified them into single Weyl, high degenerate Weyl, and nodal-line (ring) TPs. Among them, three representative cases of TPs have been discussed in detail. Furthermore, we suggest 322 TP materials with potential clean nontrivial surface states, which are favorable for experimental characterizations. This work significantly increases the current library of TP materials, which enables an in-depth investigation of their structure-property relations and opens new avenues for future device design related to TPs.

Strong correlation brings a rich array of emergent phenomena, as well as a daunting challenge to theoretical physics study. In condensed matter physics, the fractional quantum Hall effect is a prominent example of strong correlation, with Landau level mixing being one of the most challenging aspects to address using traditional computational methods. Deep learning real-space neural network wavefunction methods have emerged as promising architectures to describe electron correlations in molecules and materials, but their power has not been fully tested for exotic quantum states. In this work, we employ real-space neural network wavefunction techniques to investigate fractional quantum Hall systems. On both 1/3 and 2/5 filling systems, we achieve energies consistently lower than exact diagonalization results which only consider the lowest Landau level. We also demonstrate that the real-space neural network wavefunction can naturally capture the extent of Landau level mixing up to a very high level, overcoming the limitations of traditional methods. Our work underscores the potential of neural networks for future studies of strongly correlated systems and opens new avenues for exploring the rich physics of the fractional quantum Hall effect.

Molecular representation is a foundational element in our understanding of the physical world. Its importance ranges from the fundamentals of chemical reactions to the design of new therapies and materials. Previous molecular machine learning models have employed strings, fingerprints, global features, and simple molecular graphs that are inherently information-sparse representations. However, as the complexity of prediction tasks increases, the molecular representation needs to encode higher fidelity information. This work introduces a novel approach to infusing quantum-chemical-rich information into molecular graphs via stereoelectronic effects. We show that the explicit addition of stereoelectronic interactions significantly improves the performance of molecular machine learning models. Furthermore, stereoelectronics-infused representations can be learned and deployed with a tailored double graph neural network workflow, enabling its application to any downstream molecular machine learning task. Finally, we show that the learned representations allow for facile stereoelectronic evaluation of previously intractable systems, such as entire proteins, opening new avenues of molecular design.

We report the measurement of the electric dipole moment of aluminum monochloride (AlCl) using a cryogenic buffer-gas beam source. Our measurements provide values for the dipole moments of the two lowest vibrational states of the X^1Sigma^+ and the A^1Pi electronic states. We also show that spin-orbit coupling with an extended number of spin states is essential in the ab initio calculation to correctly describe both the dipole moment and the Te energy of AlCl. We further lay out the implications of these results for astrophysical models of stellar and planetary evolution that have used a substitute value for the dipole moment of AlCl until now.

The last few years have seen significant experimental progress in characterizing the copper-based hole-doped high temperature superconductors in the regime of low hole density, p. Quantum oscillations, NMR, X-ray, and STM experiments have shed much light on the nature of the ordering at low temperatures. We review evidence that the order parameter in the non-Lanthanum-based cuprates is a d-form factor density-wave. This novel order acts as an unexpected window into the electronic structure of the pseudogap phase at higher temperatures in zero field: we argue in favor of a `fractionalized Fermi liquid' (FL*) with 4 pockets of spin S=1/2, charge +e fermions enclosing an area specified by p.

While attaining external field control of bimolecular chemical reactions has long been a coveted goal of physics and chemistry, the role of hyperfine interactions and dc magnetic fields in achieving such control has remained elusive. We develop an extended coupled-channel statistical theory of barrierless atom-diatom chemical reactions, and apply it to elucidate the effects of magnetic fields and hyperfine interactions on the ultracold chemical reaction Li(^2S_{1/2}) + CaH(^2Σ^+) to LiH(^1Σ^+) + Ca(^1S_{0}) on a newly developed set of ab initio potential energy surfaces. We observe large field effects on the reaction cross sections, opening up the possibility of controlling ultracold barrierless chemical reactions by tuning selected hyperfine states of the reactants with an external magnetic field.

Infrared (IR) spectroscopy is widely used for chemical sensing, but extracting reliable chemical information from spectra remains challenging. Conventional interpretation is labor-intensive, relies on prior knowledge and reference spectra, and is difficult to scale, whereas most machine-learning methods are tailored to individual tasks or datasets, require large labeled training sets, and transfer poorly across analytical objectives and experimental datasets. Here we introduce UltraIR, a foundation model for IR spectroscopy with more than 100 million parameters that enables simulation-to-real transfer learning for chemical sensing and analysis from molecules to complex samples. UltraIR is pretrained on approximately 60 million simulated IR spectra using spectral reconstruction, molecular fingerprint similarity alignment, and functional-group prediction, then adapted to downstream objectives with task-specific labels or targets. Across functional-group prediction, molecular structure elucidation, physicochemical property prediction, mixture-component identification and quantification, bacterial classification, medicinal-herb geographic origin traceability and constituent quantification, microplastics classification, and soil property prediction, UltraIR outperforms conventional machine-learning and task-specific deep-learning baselines. It performs strongly with limited labeled experimental spectra and in zero-shot inference for the same analytical task across Fourier-transform infrared spectrometers and laboratories, providing a route to adaptable, data-efficient chemical sensing from complex real-world samples.

The amplitude of ground state superconducting energy gap Δ(0) and relative jump in electronic specific heat at the transition temperature, ΔC{/}γT_c, are primary fundamental parameters of any superconductor. There are several well-established techniques to measure these values for bulk samples. However, there is limited number of techniques which can be applied to measure these parameters in atomically thin superconductors. Here we proposed a new approach to extract Δ(0) and ΔC{/}γT_c in atomically thin superconductors by utilizing perpendicular, Bc2,perp(T) (when magnetic field is applied in perpendicular direction to the film surface), and parallel, Bc2,||(T) (when magnetic field is applied in parallel direction to the film surface), upper critical field data. Deduced parameters for few layers thick Al, Sn, NbSe2, MoS2, magic angle twisted trilayer graphene (MATTG), and WTe2 are well matched values expected for strong- and moderately strong-coupled electron-phonon mediated superconductors. Observed, in many atomically thin superconductors, an enhancement of Bc2,||(0) above the Pauli-Clogston-Chandrasekhar limiting field (i.e., magnetic field required to break the Cooper pair) is explained based on the sample geometry, without an assumption that some exotic pairing mechanism, for instance, Ising-type, is emergent in these materials.

We propose a quantum repeater architecture that can operate under ambient conditions. Our proposal builds on recent progress towards non-cryogenic spin-photon interfaces based on nitrogen-vacancy centers, which have excellent spin coherence times even at room temperature, and optomechanics, which allows to avoid phonon-related decoherence and also allows the emitted photons to be in the telecom band. We apply the photon number decomposition method to quantify the fidelity and the efficiency of entanglement established between two remote electron spins. We describe how the entanglement can be stored in nuclear spins and extended to long distances via quasi-deterministic entanglement swapping operations involving the electron and nuclear spins. We furthermore propose schemes to achieve high-fidelity readout of the spin states at room temperature using the spin-optomechanics interface. Our work shows that long-distance quantum networks made of solid-state components that operate at room temperature are within reach of current technological capabilities.

We demonstrate a coherent spin shuttle through a GaAs/AlGaAs quadruple-quantum-dot array. Starting with two electrons in a spin-singlet state in the first dot, we shuttle one electron over to either the second, third or fourth dot. We observe that the separated spin-singlet evolves periodically into the m=0 spin-triplet and back before it dephases due to nuclear spin noise. We attribute the time evolution to differences in the local Zeeman splitting between the respective dots. With the help of numerical simulations, we analyse and discuss the visibility of the singlet-triplet oscillations and connect it to the requirements for coherent spin shuttling in terms of the inter-dot tunnel coupling strength and rise time of the pulses. The distribution of entangled spin pairs through tunnel coupled structures may be of great utility for connecting distant qubit registers on a chip.

We scale a CUDA-Q-native pipeline coupling a generative quantum eigensolver (GQE) to quantum-selected configuration interaction (QSCI) across active spaces of 14 to 44 qubits, applied to the extreme-ultraviolet (EUV) photoresist chemistry of monoalkyltin oxo-hydroxides. A GPT-2 policy emits UCCSD operator sequences; sampled bitstrings become determinants, diagonalised classically, and a cross-circuit generalised-eigenvalue refinement makes every reported GQE+QSCI energy a variational upper bound. Every rung from 14 to 40 qubits carries an exact CASCI or FCI reference, up to 166 million determinants for SnO at 32 qubits. The pipeline is chemically accurate, below 1.6 mHa, through 30 qubits on methyltin trihydroxide and through 32 on SnO, on the best seed at the top rungs. Circuit depth rather than training length is the scaling lever; the refined subspace grows near-linearly with the operator count while staying a vanishing fraction of the determinant space, 0.017% at the 32-qubit SnO rung. It also runs on the 54-qubit IQM Emerald processor, at the shallow depths its routed two-qubit gates allow, reaching +0.330 mHa for SnO at 14 qubits from a CCSD-amplitude-ordered pool prefix and +3.92 mHa for the industrial n-butyltin ligand at 22 qubits from depth-truncated trained circuits under per-circuit readout self-calibration, 81% of the active-space correlation; classical configuration recovery on those counts tightens the 22-qubit result to +0.18 to 0.21 mHa. For the methyl resist, ionisation collapses the classical UCCSD(T) Sn-C bond dissociation energy from 72.6 to 21.2 kcal/mol, the switch that flips solubility on exposure. Against that, the 40-qubit result is support-limited at 22.8 mHa, the full trained ansatz on hardware awaits better fidelities, and classical subspace expansion reaches the 32 to 40-qubit spaces with no quantum sampler, so that boundary is mapped, not beaten.

This report is a primarily survey on the chemical nature of some exotic species containing the positively charged muon and the muonic Helium, i.e., the negatively charged muon plus helium nucleus, as exotic isotopes of hydrogen, using the newly developed multi-component quantum theory of atoms in molecules (MC-QTAIM) analysis, employing ab initio non-Born-Oppenhiemer wavefunctions. Accordingly, the "atoms in molecules" analysis performed on various asymmetric exotic isotopomers of hydrogen molecule, recently detected experimentally [Science 331, 448 (2011)], demonstrates that both the exotic isotopes are capable of forming atoms in molecules and retaining the identity of hydrogen atom. Various derived properties of atomic basins containing muonic helium cast no doubt that apart from its short life time, it is a heavier isotope of hydrogen while the properties of basins containing the positively charged muon are more remote from those of the orthodox hydrogen basins, capable of appreciable donation of electrons as well as large charge polarization; however, with some tolerance, they may be categorized also as hydrogen basins though with a smaller electronegativity. All in all, present study also clearly demonstrates that the MC-QTAIM analysis is an efficient approach to decipher the chemical nature of species containing exotic constituents, hard to be elucidated by experimental and/or alternative theoretical schemes.

We present a web-based software tool, the Virtual Quantum Optics Laboratory (VQOL), that may be used for designing and executing realistic simulations of quantum optics experiments. A graphical user interface allows one to rapidly build and configure a variety of different optical experiments, while the runtime environment provides unique capabilities for visualization and analysis. All standard linear optical components are available as well as sources of thermal, coherent, and entangled Gaussian states. A unique aspect of VQOL is the introduction of non-Gaussian measurements using detectors modeled as deterministic devices that "click" when the amplitude of the light falls above a given threshold. We describe the underlying theoretical models and provide several illustrative examples. We find that VQOL provides a a faithful representation of many experimental quantum optics phenomena and may serve as both a useful instructional tool for students as well as a valuable research tool for practitioners.

The paper is a continuation of the study started in Yorzh1. Schrodinger operators on finite compact metric graphs are considered under the assumption that the matching conditions at the graph vertices are of delta type. Either an infinite series of trace formulae (provided that edge potentials are infinitely smooth) or a finite number of such formulae (in the cases of L_1 and C^M edge potentials) are obtained which link together two different quantum graphs under the assumption that their spectra coincide. Applications are given to the problem of recovering matching conditions for a quantum graph based on its spectrum.

Many hybrid quantum-classical algorithms for the application of ground state energy estimation in quantum chemistry involve estimating the expectation value of a molecular Hamiltonian with respect to a quantum state through measurements on a quantum device. To guide the selection of measurement methods designed for this observable estimation problem, we propose a benchmark called CSHOREBench (Common States and Hamiltonians for ObseRvable Estimation Benchmark) that assesses the performance of these methods against a set of common molecular Hamiltonians and common states encountered during the runtime of hybrid quantum-classical algorithms. In CSHOREBench, we account for resource utilization of a quantum computer through measurements of a prepared state, and a classical computer through computational runtime spent in proposing measurements and classical post-processing of acquired measurement outcomes. We apply CSHOREBench considering a variety of measurement methods on Hamiltonians of size up to 16 qubits. Our discussion is aided by using the framework of decision diagrams which provides an efficient data structure for various randomized methods and illustrate how to derandomize distributions on decision diagrams. In numerical simulations, we find that the methods of decision diagrams and derandomization are the most preferable. In experiments on IBM quantum devices against small molecules, we observe that decision diagrams reduces the number of measurements made by classical shadows by more than 80%, that made by locally biased classical shadows by around 57%, and consistently require fewer quantum measurements along with lower classical computational runtime than derandomization. Furthermore, CSHOREBench is empirically efficient to run when considering states of random quantum ansatz with fixed depth.

Previous theoretical and experimental research has shown that current NISQ devices constitute powerful platforms for analogue quantum simulation. With the exquisite level of control offered by state-of-the-art quantum computers, we show that one can go further and implement a wide class of Floquet Hamiltonians, or timedependent Hamiltonians in general. We then implement a single-qubit version of these models in the IBM Quantum Experience and experimentally realize a temporal version of the Bernevig-Hughes-Zhang Chern insulator. From our data we can infer the presence of a topological transition, thus realizing an earlier proposal of topological frequency conversion by Martin, Refael, and Halperin. Our study highlights promises and limitations when studying many-body systems through multi-frequency driving of quantum computers.

Computational quantum chemistry plays a critical role in drug discovery, chemical synthesis, and materials science. While first-principles methods, such as density functional theory (DFT), provide high accuracy in modeling electronic structures and predicting molecular properties, they are computationally expensive. Machine learning interatomic potentials (MLIPs) have emerged as promising surrogate models that aim to achieve DFT-level accuracy while enabling efficient large-scale atomistic simulations. The development of accurate and transferable MLIPs requires large-scale, high-quality datasets with both energy and force labels. Critically, MLIPs must generalize not only to stable geometries but also to intermediate, non-equilibrium conformations encountered during atomistic simulations. In this work, we introduce PubChemQCR, a large-scale dataset of molecular relaxation trajectories curated from the raw geometry optimization outputs of the PubChemQC project. PubChemQCR is the largest publicly available dataset of DFT-based relaxation trajectories for small organic molecules, comprising approximately 3.5 million trajectories and over 300 million molecular conformations computed at various levels of theory. Each conformation is labeled with both total energy and atomic forces, making the dataset suitable for training and evaluating MLIPs. To provide baselines for future developments, we benchmark nine representative MLIP models on the dataset. Our resources are publicly available at https://huggingface.co/divelab

Recently, pre-trained foundation models have enabled significant advancements in multiple fields. In molecular machine learning, however, where datasets are often hand-curated, and hence typically small, the lack of datasets with labeled features, and codebases to manage those datasets, has hindered the development of foundation models. In this work, we present seven novel datasets categorized by size into three distinct categories: ToyMix, LargeMix and UltraLarge. These datasets push the boundaries in both the scale and the diversity of supervised labels for molecular learning. They cover nearly 100 million molecules and over 3000 sparsely defined tasks, totaling more than 13 billion individual labels of both quantum and biological nature. In comparison, our datasets contain 300 times more data points than the widely used OGB-LSC PCQM4Mv2 dataset, and 13 times more than the quantum-only QM1B dataset. In addition, to support the development of foundational models based on our proposed datasets, we present the Graphium graph machine learning library which simplifies the process of building and training molecular machine learning models for multi-task and multi-level molecular datasets. Finally, we present a range of baseline results as a starting point of multi-task and multi-level training on these datasets. Empirically, we observe that performance on low-resource biological datasets show improvement by also training on large amounts of quantum data. This indicates that there may be potential in multi-task and multi-level training of a foundation model and fine-tuning it to resource-constrained downstream tasks.

The task of locating first order saddle points on high-dimensional surfaces describing the variation of energy as a function of atomic coordinates is an essential step for identifying the mechanism and estimating the rate of thermally activated events within the harmonic approximation of transition state theory. When combined directly with electronic structure calculations, the number of energy and atomic force evaluations needed for convergence is a primary issue. Here, we describe an efficient implementation of Gaussian process regression (GPR) acceleration of the minimum mode following method where a dimer is used to estimate the lowest eigenmode of the Hessian. A surrogate energy surface is constructed and updated after each electronic structure calculation. The method is applied to a test set of 500 molecular reactions previously generated by Hermez and coworkers [J. Chem. Theory Comput. 18, 6974 (2022)]. An order of magnitude reduction in the number of electronic structure calculations needed to reach the saddle point configurations is obtained by using the GPR compared to the dimer method. Despite the wide range in stiffness of the molecular degrees of freedom, the calculations are carried out using Cartesian coordinates and are found to require similar number of electronic structure calculations as an elaborate internal coordinate method implemented in the Sella software package. The present implementation of the GPR surrogate model in C++ is efficient enough for the wall time of the saddle point searches to be reduced in 3 out of 4 cases even though the calculations are carried out at a low Hartree-Fock level.

Subwavelength atomic lattices have emerged as a promising platform for quantum applications, leveraging collective superradiant and subradiant effects to enhance light-matter interactions. Integrating atomic lattices into nanostructures is at the front of effort toward any application with atomic lattices, but is still a challenging theoretical task, as the dipole interactions are hard to model in arbitrary dielectric environment. Here, we develop a formalism that allows the embedding of emitters to a wide class of thin curved waveguides, by greatly simplifying the wave equation and consequentially the dipole interactions. We demonstrate the formalism for locally constant positive curved surfaces, where we derive a new surface Green function that allows exact computation of the collective superradiant and subradiant states. We also show how the curvature and the thickness of the waveguides affects the collective states through an effective surface wavelength.

Hybrid superconductor-semiconductor systems have received a great deal of attention in the last few years because of their potential for quantum engineering, including novel qubits and topological devices. The proximity effect, the process by which the semiconductor inherits superconducting correlations, is an essential physical mechanism of such hybrids. Recent experiments have demonstrated the proximity effect in hole-based semiconductors, but, in contrast to electrons, the precise mechanism by which the hole bands acquire superconducting correlations remains an open question. In addition, hole spins exhibit a complex strong spin-orbit interaction, with largely anisotropic responses to electric and magnetic fields, further motivating the importance of understanding the interplay between such effects and the proximity effect. In this work, we analyze this physics with focus on germanium-based two-dimensional gases. Specifically, we develop an effective theory supported by full numerics, allowing us to extract various analytical expressions and predict different types of superconducting correlations including non-standard forms of singlet and triplet pairing mechanisms with non-trivial momentum dependence; as well as different Zeeman and Rashba spin-orbit contributions. This, together with their precise dependence on electric and magnetic fields, allows us to make specific experimental predictions, including the emergence of f-type superconductivity, Bogoliubov Fermi surfaces, and gapless regimes caused by large in-plane magnetic fields.

Although quantum simulation can give insight into elusive or intractable physical phenomena, many quantum simulators are unavoidably limited in the models they mimic. Such is also the case for atom arrays interacting via Rydberg states - a platform potentially capable of simulating any kind of spin exchange model, albeit with currently unattainable experimental capabilities. Here, we propose a new route towards simulating generic spin exchange Hamiltonians in atom arrays, using Floquet engineering with both global and local control. To demonstrate the versatility and applicability of our approach, we numerically investigate the generation of several spin exchange models which have yet to be realized in atom arrays, using only previously-demonstrated experimental capabilities. Our proposed scheme can be readily explored in many existing setups, providing a path to investigate a large class of exotic quantum spin models.

The intricate relationship between electrons and the crystal lattice is a linchpin in condensed matter, traditionally described by the Fr\"ohlich model encompassing the lowest-order lattice-electron coupling. Recently developed quantum acoustics, emphasizing the wave nature of lattice vibrations, has enabled the exploration of previously uncharted territories of electron-lattice interaction not accessible with conventional tools such as perturbation theory. In this context, our agenda here is two-fold. First, we showcase the application of machine learning methods to categorize various interaction regimes within the subtle interplay of electrons and the dynamical lattice landscape. Second, we shed light on a nebulous region of electron dynamics identified by the machine learning approach and then attribute it to transient localization, where strong lattice vibrations result in a momentary Anderson prison for electronic wavepackets, which are later released by the evolution of the lattice. Overall, our research illuminates the spectrum of dynamics within the Fr\"ohlich model, such as transient localization, which has been suggested as a pivotal factor contributing to the mysteries surrounding strange metals. Furthermore, this paves the way for utilizing time-dependent perspectives in machine learning techniques for designing materials with tailored electron-lattice properties.

Optically addressable solid-state spins have been extensively studied for quantum technologies, offering unique advantages for quantum computing, communication, and sensing. Advancing these applications is generally limited by finding materials that simultaneously provide lifetime-limited optical and long spin coherences. Here, we introduce ^{171}Yb^{3+} ions doped into a CaWO_4 crystal. We perform high-resolution spectroscopy of the excited state, and demonstrate all-optical coherent control of the electron-nuclear spin ensemble. We find narrow inhomogeneous broadening of the optical transitions of 185 MHz and radiative-lifetime-limited coherence time up to 0.75 ms. Next to this, we measure a spin-transition ensemble line width of 5 kHz and electron-nuclear spin coherence time reaching 0.15 seconds at zero magnetic field between 50 mK and 1 K temperatures. These results demonstrate the potential of ^{171}Yb^{3+}:CaWO_4 as a low-noise platform for building quantum technologies with ensemble-based memories, microwave-to-optical transducers, and optically addressable single-ion spin qubits.

Two-photon resonance transition technology has been proven to have a wide range of applications,it's limited by the available wavelength of commercial lasers.The application of optical comb technology with direct two-photon transition (DTPT) will not be restricted by cw lasers.This article will further theoretically analyze the dynamics effects of the DTPT process driven by optical frequency combs. In a three-level atomic system, the population of particles and the amount of momentum transfer on atoms are increased compared to that of the DTPT-free process. The 17% of population increasement in 6-level system of cesium atoms has verified that DTPT process has a robust enhancement on the effect of momentum transfer. It can be used to excite the DTPTs of rubidium and cesium simultaneously with the same mode-locked laser. And this technology has potential applications in cooling different atoms to obtain polar cold molecules, as well as high-precision spectroscopy measurement.

The independent atom ansatz of density functional theory yields an accurate analytical expression for dynamic correlation energy in the H_{2} molecule: E_{c} = 0.5(1 - 2)(ab|ba) for the atom-additive self-consistent density rho = |a|^{2} + |b|^{2}. Combined with exact atomic self-exchange, it recovers more than 99.5 % of nearly exact SCAN exchange-correlation energy at R > 0.5 A, differing by less than 0.12 eV. The total energy functional correctly dissociates the H-H bond and yields absolute errors of 0.002 A, 0.19 eV, and 13 cm^{-1} relative to experiment at the tight binding computational cost. The chemical bond formation is attributed to the asymptotic Heitler-London resonance of quasi-orthogonal atomic states (- (ab|ba)) with no contributions from kinetic energy or charge accumulation in the bond.

Elucidating quantum coherence effects and geometrical factors for efficient energy transfer in photosynthesis has the potential to uncover non-classical design principles for advanced organic materials. We study energy transfer in a linear light-harvesting model to reveal that dimerized geometries with strong electronic coherences within donor and acceptor pairs exhibit significantly improved efficiency, which is in marked contrast to predictions of the classical F\"orster theory. We reveal that energy tuning due to coherent delocalization of photoexcitations is mainly responsible for the efficiency optimization. This coherence-assisted energy-tuning mechanism also explains the energetics and chlorophyll arrangements in the widely-studied Fenna-Matthews-Olson complex. We argue that a clustered network with rapid energy relaxation among donors and resonant energy transfer from donor to acceptor states provides a basic formula for constructing efficient light-harvesting systems, and the general principles revealed here can be generalized to larger systems and benefit future innovation of efficient molecular light-harvesting materials.

We compare the performance of different methodologies for finding the ground state of the molecule BeH2. We implement adaptive, tetris-adaptive variational quantum eigensolver (VQE), and entanglement forging to reduce computational resource requirements. We run VQE experiments on IBM quantum processing units and use error mitigation, including twirled readout error extinction (TREX) and zero-noise extrapolation (ZNE) to reduce noise. Our results affirm the usefulness of VQE on noisy quantum hardware and pave the way for the usage of VQE related methods for large molecules.

Field evaporation from ionic or covalently bonded materials often leads to the emission of molecular ions. The metastability of these molecular ions, particularly under the influence of the intense electrostatic field (1010 Vm-1), makes them prone to dissociation with or without an exchange of energy amongst them. These processes can affect the analytical performance of atom probe tomography (APT). For instance, neutral species formed through dissociation may not be detected at all or with a time of flight no longer related to their mass, causing their loss from the analysis. Here, we evaluated the changes in the measured composition of FeO, Fe2O3 and Fe3O4 across a wide range of analysis conditions. Possible dissociation reactions are predicted by density-functional theory (DFT) calculations considering the spin states of the molecules. The energetically favoured reactions are traced on to the multi-hit ion correlation histograms, to confirm their existence within experiments, using an automated Python-based routine. The detected reactions are carefully analysed to reflect upon the influence of these neutrals from dissociation reactions on the performance of APT for analysing iron oxides.

Recent neural network-based wave functions have achieved state-of-the-art accuracies in modeling ab-initio ground-state potential energy surface. However, these networks can only solve different spatial arrangements of the same set of atoms. To overcome this limitation, we present Graph-learned orbital embeddings (Globe), a neural network-based reparametrization method that can adapt neural wave functions to different molecules. Globe learns representations of local electronic structures that generalize across molecules via spatial message passing by connecting molecular orbitals to covalent bonds. Further, we propose a size-consistent wave function Ansatz, the Molecular orbital network (Moon), tailored to jointly solve Schr\"odinger equations of different molecules. In our experiments, we find Moon converging in 4.5 times fewer steps to similar accuracy as previous methods or to lower energies given the same time. Further, our analysis shows that Moon's energy estimate scales additively with increased system sizes, unlike previous work where we observe divergence. In both computational chemistry and machine learning, we are the first to demonstrate that a single wave function can solve the Schr\"odinger equation of molecules with different atoms jointly.

The absorption and fluorescence properties in a class of oligothiophene push-pull biomarkers are investigated with a long-range-corrected (LC) density functional method. Using linear response time-dependent density functional theory (TDDFT), we calculate excitation energies, fluorescence energies, oscillator strengths, and excited-state dipole moments. To benchmark and assess the quality of the LC-TDDFT formalism, an extensive comparison is made between LC-BLYP excitation energies and approximate coupled cluster singles and doubles (CC2) calculations. When using a properly-optimized value of the range parameter, "mu", we find that the LC technique provides an accurate description of charge-transfer excitations as a function of biomarker size and chemical functionalization. In contrast, we find that re-optimizing the fraction of Hartree Fock exchange in conventional hybrid functionals still yields an inconsistent description of excitation energies and oscillator strengths for the two lowest excited states in our series of biomarkers. The results of the present study emphasize the importance of a distance-dependent contribution of exchange in TDDFT for investigating excited-state properties.

The search for low-cost, durable, and effective catalysts is essential for green hydrogen production and carbon dioxide upcycling to help in the mitigation of climate change. Discovery of new catalysts is currently limited by the gap between what AI-accelerated computational models predict and what experimental studies produce. To make progress, large and diverse experimental datasets are needed that are reproducible and tested at industrially-relevant conditions. We address these needs by utilizing a comprehensive high-throughput characterization and experimental pipeline to create the Open Catalyst Experiments 2024 (OCX24) dataset. The dataset contains 572 samples synthesized using both wet and dry methods with X-ray fluorescence and X-ray diffraction characterization. We prepared 441 gas diffusion electrodes, including replicates, and evaluated them using zero-gap electrolysis for carbon dioxide reduction (CO_2RR) and hydrogen evolution reactions (HER) at current densities up to 300 mA/cm^2. To find correlations with experimental outcomes and to perform computational screens, DFT-verified adsorption energies for six adsorbates were calculated on sim20,000 inorganic materials requiring 685 million AI-accelerated relaxations. Remarkably from this large set of materials, a data driven Sabatier volcano independently identified Pt as being a top candidate for HER without having any experimental measurements on Pt or Pt-alloy samples. We anticipate the availability of experimental data generated specifically for AI training, such as OCX24, will significantly improve the utility of computational models in selecting materials for experimental screening.

We report an accurate study of interactions between Benzene molecules using variational quantum Monte Carlo (VMC) and diffusion quantum Monte Carlo (DMC) methods. We compare these results with density functional theory (DFT) using different van der Waals (vdW) functionals. In our QMC calculations, we use accurate correlated trial wave functions including three-body Jastrow factors, and backflow transformations. We consider two benzene molecules in the parallel displaced (PD) geometry, and find that by highly optimizing the wave function and introducing more dynamical correlation into the wave function, we compute the weak chemical binding energy between aromatic rings accurately. We find optimal VMC and DMC binding energies of -2.3(4) and -2.7(3) kcal/mol, respectively. The best estimate of the CCSD(T)/CBS limit is -2.65(2) kcal/mol [E. Miliordos et al, J. Phys. Chem. A 118, 7568 (2014)]. Our results indicate that QMC methods give chemical accuracy for weakly bound van der Waals molecular interactions, comparable to results from the best quantum chemistry methods.

Machine-learned interatomic potentials trained across the periodic table have made atomistic simulation broadly accessible, and specializing them to a single compound class is widely expected to improve accuracy. Yet examples remain scarce, and fewer still surpass universal models in speed or reach a higher level of electronic-structure theory. Here we present a potential that is universal within the class of water-free solid-state hydrogen-bond network mediated proton conductors rather than across chemistry and a database of 4.4 million first-principles configurations spanning 55 materials. It surpasses leading general-purpose potentials across this domain, recovering measured activation energies and the ordering of anion rotational dynamics that those models miss; agreement on static structure does not imply agreement on transport. Accuracy falls for compositions far from the training set but stays competitive for close structural relatives, and a higher level of electronic-structure theory is reached with a few hundred additional configurations per material. We further introduce a compact variant carrying a fifth of the parameters, faster still and yet more accurate than every general-purpose model tested. It sustains more than a quarter of a million atoms on a single graphics processor, placing grain boundaries and the transition into the highly conducting phase within reach, and making a quantum treatment of the protons affordable. Reference accuracy and accessible system size thus become largely independent, offering a template for other compound classes.

Quantum materials hosting Weyl fermions have opened a new era of research in condensed matter physics. First proposed in 1929 in particle physics, Weyl fermions have yet to be observed as elementary particles. In 2015, Weyl fermions were detected as collective electronic excitations in the strong spin-orbit coupled material tantalum arsenide, TaAs. This discovery was followed by a flurry of experimental and theoretical explorations of Weyl phenomena in materials. Weyl materials naturally lend themselves to the exploration of the topological index associated with Weyl fermions and their divergent Berry curvature field, as well as the topological bulk-boundary correspondence giving rise to protected conducting surface states. Here, we review the broader class of Weyl topological phenomena in materials, starting with the observation of emergent Weyl fermions in the bulk and of Fermi arc states on the surface of the TaAs family of crystals by photoemission spectroscopy. We then discuss some of the exotic optical and magnetic responses observed in these materials, as well as the progress in developing some of the related chiral materials. We discuss the conceptual development of high-fold chiral fermions, which generalize Weyl fermions, and we review the observation of high-fold chiral fermion phases by taking the rhodium silicide, RhSi, family of crystals as a prime example. Lastly, we discuss recent advances in Weyl-line phases in magnetic topological materials. With this Review, we aim to provide an introduction to the basic concepts underlying Weyl physics in condensed matter, and to representative materials and their electronic structures and topology as revealed by spectroscopic studies. We hope this work serves as a guide for future theoretical and experimental explorations of chiral fermions and related topological quantum systems with potentially enhanced functionalities.

Graph Neural Networks (GNNs) have been widely adopted for drug discovery with molecular graphs. Nevertheless, current GNNs are mainly good at leveraging short-range interactions (SRI) but struggle to capture long-range interactions (LRI), both of which are crucial for determining molecular properties. To tackle this issue, we propose a method that implicitly projects all original atoms into a few Neural Atoms, which abstracts the collective information of atomic groups within a molecule. Specifically, we explicitly exchange the information among neural atoms and project them back to the atoms' representations as an enhancement. With this mechanism, neural atoms establish the communication channels among distant nodes, effectively reducing the interaction scope of arbitrary node pairs into a single hop. To provide an inspection of our method from a physical perspective, we reveal its connection with the traditional LRI calculation method, Ewald Summation. We conduct extensive experiments on three long-range graph benchmarks, covering both graph-level and link-level tasks on molecular graphs. We empirically justify that our method can be equipped with an arbitrary GNN and help to capture LRI.

The elementary CuO2 plane sustaining cuprate high-temperature superconductivity occurs typically at the base of a periodic array of edge-sharing CuO5 pyramids. Virtual transitions of electrons between adjacent planar Cu and O atoms, occurring at a rate t/{hbar} and across the charge-transfer energy gap E, generate 'superexchange' spin-spin interactions of energy Japprox4t^4/E^3 in an antiferromagnetic correlated-insulator state. However, Hole doping the CuO2 plane converts this into a very high temperature superconducting state whose electron-pairing is exceptional. A leading proposal for the mechanism of this intense electron-pairing is that, while hole doping destroys magnetic order it preserves pair-forming superexchange interactions governed by the charge-transfer energy scale E. To explore this hypothesis directly at atomic-scale, we combine single-electron and electron-pair (Josephson) scanning tunneling microscopy to visualize the interplay of E and the electron-pair density nP in {Bi_2Sr_2CaCu_2O_{8+x}}. The responses of both E and nP to alterations in the distance {\delta} between planar Cu and apical O atoms are then determined. These data reveal the empirical crux of strongly correlated superconductivity in CuO2, the response of the electron-pair condensate to varying the charge transfer energy. Concurrence of predictions from strong-correlation theory for hole-doped charge-transfer insulators with these observations, indicates that charge-transfer superexchange is the electron-pairing mechanism of superconductive {Bi_2Sr_2CaCu_2O_{8+x}}.

Electron-electron (e-e) and electron-phonon (e-ph) interactions are challenging to describe in correlated materials, where their joint effects govern unconventional transport, phase transitions, and superconductivity. Here we combine first-principles e-ph calculations with dynamical mean field theory (DMFT) as a step toward a unified description of e-e and e-ph interactions in correlated materials. We compute the e-ph self-energy using the DMFT electron Green's function, and combine it with the e-e self-energy from DMFT to obtain a Green's function including both interactions. This approach captures the renormalization of quasiparticle dispersion and spectral weight on equal footing. Using our method, we study the e-ph and e-e contributions to the resistivity and spectral functions in the correlated metal Sr_2RuO_4. In this material, our results show that e-e interactions dominate transport and spectral broadening in the temperature range we study (50-310~K), while e-ph interactions are relatively weak and account for only sim10\% of the experimental resistivity. We also compute effective scattering rates, and find that the e-e interactions result in scattering several times greater than the Planckian value k_BT, whereas e-ph interactions are associated with scattering rates lower than k_BT. Our work demonstrates a first-principles approach to combine electron dynamical correlations from DMFT with e-ph interactions in a consistent way, advancing quantitative studies of correlated materials.

We provide a theoretical analysis for a recently demonstrated cooling method. Two-level particles undergo successive adiabatic transfers upon interaction with counter-propagating laser beams that are repeatedly swept over the transition frequency. We show that particles with narrow linewidth transitions can be cooled to near the recoil limit. This cooling mechanism has a reduced reliance on spontaneous emission compared to Doppler cooling, and hence shows promise for application to systems lacking closed cycling transitions, such as molecules.

We describe the first-principles design and subsequent synthesis of a new material with the specific functionalities required for a solid-state-based search for the permanent electric dipole moment of the electron. We show computationally that perovskite-structure europium barium titanate should exhibit the required large and pressure-dependent ferroelectric polarization, local magnetic moments, and absence of magnetic ordering even at liquid helium temperature. Subsequent synthesis and characterization of Eu_{0.5}Ba_{0.5}TiO_3 ceramics confirm the predicted desirable properties.

The emergence of two-dimensional (2D) materials has attracted a great deal of attention due to their fascinating physical properties and potential applications for future nanoelectronic devices. Since the first isolation of graphene, a Dirac material, a large family of new functional 2D materials have been discovered and characterized, including insulating 2D boron nitride, semiconducting 2D transition metal dichalcogenides and black phosphorus, and superconducting 2D bismuth strontium calcium copper oxide, molybdenum disulphide and niobium selenide, etc. Here, we report the identification of ferromagnetic thin flakes of Cr2Ge2Te6 (CGT) with thickness down to a few nanometers, which provides a very important piece to the van der Waals structures consisting of various 2D materials. We further demonstrate the giant modulation of the channel resistance of 2D CGT devices via electric field effect. Our results illustrate the gate voltage tunability of 2D CGT and the potential of CGT, a ferromagnetic 2D material, as a new functional quantum material for applications in future nanoelectronics and spintronics.

As quantum computing approaches the threshold where certain tasks demonstrably outpace their classical machines, the need for a precise, clear, consensus-driven definition of quantum advantage becomes essential. Rapid progress in the field has blurred this term across companies, architectures, and application domains. Here, we aim to articulate an operational definition for quantum advantage that is both platform-agnostic and empirically verifiable. Building on this framework, we highlight the algorithmic families most likely to achieve early advantage. Finally, we outline our vision for the near future, in which quantum computers enhance existing high-performance computing platforms, enabling new frontiers in chemistry, materials discovery, optimization, and beyond.

We present the design of a flexible quantum-chemical method development framework, which supports employing any type of basis function. This design has been implemented in the light-weight program package molsturm, yielding a basis-function-independent self-consistent field scheme. Versatile interfaces, making use of open standards like python, mediate the integration of molsturm with existing third-party packages. In this way both rapid extension of the present set of methods for electronic structure calculations as well as adding new basis function types can be readily achieved. This makes molsturm well-suitable for testing novel approaches for discretising the electronic wave function and allows comparing them to existing methods using the same software stack. This is illustrated by two examples, an implementation of coupled-cluster doubles as well as a gradient-free geometry optimisation, where in both cases, an arbitrary basis functions could be used. molsturm is open-source and can be obtained from https://molsturm.org.

We show how many-body effects associated with background spin dynamics control the high-harmonic generation (HHG) in Mott insulators by analyzing the two-leg ladder Hubbard model. Spin dynamics activated by the interchain hopping t_y drastically modifies the HHG features. When two chains are decoupled (t_y=0), HHG originates from the dynamics of coherent doublon-holon pairs because of spin-charge separation. With increasing t_y, the doublon-holon pairs lose their coherence due to their interchain hopping and resultant spin-strings. Furthermore, the HHG signal from spin-polarons -- charges dressed by spin clouds -- leads to an additional plateau in the HHG spectrum. For large t_y, we identify unconventional HHG processes involving three elementary excitations -- two polarons and one magnon. Our results demonstrate the nontrivial nature of HHG in strongly correlated systems, and its qualitative differences to conventional semiconductors.

Transition state (TS) structures define the critical geometries and energy barriers underlying chemical reactivity, yet their fleeting nature renders them experimentally elusive and drives the reliance on costly, high-throughput density functional theory (DFT) calculations. Here, we introduce TS-GEN, a conditional flow-matching generative model that maps samples from a simple Gaussian prior directly to transition-state saddle-point geometries in a single, deterministic pass. By embedding both reactant and product conformations as conditioning information, TS-GEN learns to transport latent noise to true TS structures via an optimal-transport path, effectively replacing the iterative optimization common in nudged-elastic band or string-method algorithms. TS-GEN delivers unprecedented accuracy, achieving a root-mean-square deviation of 0.004 mathring{A} (vs. 0.103 mathring{A} for prior state-of-the-art) and a mean barrier-height error of 1.019 {rm kcal/mol} (vs. 2.864 {rm kcal/mol}), while requiring only 0.06 {rm s} GPU time per inference. Over 87% of generated TSs meet chemical-accuracy criteria (<1.58 {rm kcal/mol} error), substantially outpacing existing methods. TS-GEN also exhibits strong transferability to out-of-distribution reactions from a larger database. By uniting sub-angstrom precision, sub-second speed, and broad applicability, TS-GEN will be highly useful for high-throughput exploration of complex reaction networks, paving the way to the exploration of novel chemical reaction mechanisms.

Electron-phonon interaction is of central importance for the electrical and heat transport properties of metals, and is directly responsible for charge-density-waves or (conventional) superconducting instabilities. The direct observation of phonon dispersion anomalies across electronic phase transitions can provide insightful information regarding the mechanisms underlying their formation. Here, we review the current status of phonon dispersion studies in superconductors under hydrostatic and uniaxial pressure. Advances in the instrumentation of high resolution inelastic X-ray scattering beamlines and pressure generating devices allow these measurements to be performed routinely at synchrotron beamlines worldwide.